Advantek Networks AWN-MIMO-54RA user manual QoS, Click WMM Enable Click Apply

Page 34

through the CCX-compliant clients on the non-serving channels when this parameter is enabled.

Limit xxx milliseconds (0-2000):It limits the channel measurement time. The default value is 250 milliseconds.

3.6 QoS

The QoS Page of RaConfig. It involves “WMM Enable”, “WMM – Power Save Enable” and DLS setup.

3.6.1 Configure to enable Wi-Fi Multi-Media

If you want to use “WMM – Power Save” or “Direct Link”, you must enable WMM. The setting method of enabling WMM indicates as follows:

Step1: Click “WMM Enable”

Step2: Click “Apply”.

33

Image 34

Contents 802.11g, 54Mbps Mimo PCI Wireless Adapter User’s Manual FCC Warning Revision History Contents Wireless LAN has Activity ACT data being sent Light Status DescriptionHardware Diagram Installation Procedure Adjust the antenna position Place the PC as high as possibleInstall the Driver & Utility Page Page Page Page For Windows Vista x86 & x64 bit Page Choose Properties Æ click Device Manager To setup Wireless Network in Windows Vista Operation System Choose Connect to a network Page Wireless Network Configuration Utility Configuration utilityProfile 2Link Status 3Site Survey Configure the Profile Network Type Authentication and Security Page 3 802.1x Setting-Certification Encryption ModeAn example for MD5 Authentication 4 802.1x Setting-CA Server Tunneled Authentication4Statistics Wireless Mode AdvancedPage Click WMM Enable Click Apply QoSPage Enable WMM Power Save Click WMM Power Save Enable. And Click Setting… buttonEnable DLS Direct Link Setup Click Direct Link Setup Enable. And Click Apply buttonSetting of DLS indicates as follow Link Setup Describe DLS Status as followPage 7About Troubleshooting What is the Ieee 802.11g standard? What does Ieee 802.11 feature support?