AS1020S-8 User's Manual

SCSI Controller Enable/ Disable

Jumper JPA1 is used to enable or dis- able the Adaptec AIC-7902W SCSI controller. The default setting is on pins 1-2 to enable SCSI. See the table on right for jumper settings.

SCSI Termination Enable/ Disable

Jumpers JPA2 and JPA3 are used to enable or disable termination for SCSI channels A and B, respectively. The default setting is open to enable termi- nation. See the table on right for pin defi nitions.

Note: In order for the SCSI drives to function properly, please do not change the default setting (enabled) set by the

manufacturer.)

VGA Enable/Disable

JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper set- tings.

Power Force On

JPF allows you to enable or disable the Power Force On function. If enabled, system power will always stay on. If disabled (the default setting), the user needs to depress the power button to power up the system.

SCSI Enable/Disable

Jumper Settings (JPA1)

Both Jumpers

Defi nition

Pins 1-2

Enabled

Pins 2-3

Disabled

 

 

SCSI Term. Enable/Disable Jumper Settings (JPA2/JPA3)

Jumper Setting

Defi nition

Open

Enabled

Closed

Disabled

 

 

VGA Enable/Disable

Jumper Settings (JPG1)

Jumper Setting

Defi nition

Pins 1-2

Enabled

Pins 2-3

Disabled

 

 

Power Force On

Jumper Settings (JPF

Jumper Setting

Defi nition

Closed

Force On

Open

Disabled

 

 

5-20

Page 54
Image 54
SUPER MICRO Computer AS1020S-8 Scsi Controller Enable/ Disable, Scsi Termination Enable/ Disable, VGA Enable/Disable