AS1020S-8 User's Manual

MCT Timing Mode

Sets the timing mode for memory. Options are Auto and Manual.

User Configuration Mode

Options are Auto and Manual.

Bank Interleaving

This setting is used to determine whether bank interleaving is to be employed. The options are Auto and Disabled.

Burst Length

Use this setting to set the memory burst length. 64-bit Dq must use 4 beats. Options are 8 beats, 4 beats and 2 beats.

Enable Clock to All DIMMs

This setting allows the user to enable unused clocks to DIMMs, even if DIMM slots are empty. Options are Enabled and Disabled.

Hardware Memory Hole

When "Enabled", allows software memory remapping around the memory hole (only supported by rev. E0 processors and above). Options are Enabled and Disabled.

Node Interleaving

Use this setting to Enable or Disable node interleaving.

ECC Configuration

DRAM ECC Enable

DRAM ECC allows hardware to report and correct memory errors automati- cally. Options are Enabled and Disabled.

MCA DRAM ECC Logging

When "Enabled", MCA DRAM ECC logging and reporting is enabled. Options are Enabled and Disabled.

7-8

Page 78
Image 78
SUPER MICRO Computer AS1020S-8 MCT Timing Mode, User Configuration Mode, Bank Interleaving, Burst Length, Node Interleaving