SUPER MICRO Computer AS1020S-8 Drive Bay Installation/Removal, Accessing the Drive Bays

AS1020S-8 User's Manual

Figure 6-2. Removing the Fan Housing

6-4 Drive Bay Installation/Removal

Accessing the Drive Bays

SCSI Drives: Because of their hotswap capability, you do not need to access the inside of the chassis or power down the system to install or replace SCSI drives. Proceed to the next step for instructions.

Note: You must use standard 3.5" SCSI drives in the 1020S-8.

CD-ROM/Floppy Disk Drives: For installing/removing a CD-ROM or fl oppy disk drive, you will need to gain access to the inside of the system by removing the top cover of the chassis. Proceed to the "CD-ROM and Floppy Drive Installation" section later in this chapter for instructions.

Note: Only "slim" CD-ROM and fl oppy drives will fi t into the 1020S-8.

6-4