Advantek Networks AWN-MIMO-54RA user manual Configure the Profile

Strength, Channel, Encryption, Authentication, and Network Type. If you want to connect to any networks on the list, double-click the item on the list, and the card will automatically connect to the selected network.

Rescan Button: Click this button to collect the SSID and Channel information of all the wireless devices nearby.

Connect Button: Click this button to connect to the selected network.

Add to Profile: Add the selected network to Profile list.

3.3.1 Configure the Profile

If you want to add one Access Point to the profile, click “Add to Profile” button. And then the Add Profile windows will display as follow. You can configure your Wireless Network Security for the card.

Profile Name: Define a recognizable profile name for you to identify the different network.

SSID: The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN. The ID prevents the unintentional merging of two co-located WLANs. You may specify a SSID for the adapter and then only the device with the same SSID can interconnect to the adapter. If you want to add the network nearby to the profile list, pull down the menu, the entire network will be listed for you to add one of them to the profile list.

PSM (Power Saving Mode): The power saving function is only available when the network

type is in Infrastructure mode.

CAM (Constantly Awake Mode) – The adapter will always set in active mode.

23