ADTRAN 4206 Plan A, 4106 Plan A system manual Customer Provides, Channel Selection

Page 37

TRACER 4106/4206 System Manual	Section 4 Network Turnup Procedure

Customer Provides

The following items are necessary for the installation of the TRACER 4106/4206 system and are not provided by ADTRAN:

•21 to 60 VDC power source (or AC adapter available from ADTRAN P/N 1280650L1), either polarity referenced to ground

•Antenna and mounting hardware

•Antenna feedline cable

•Lightning arrestors

•Weatherproofing kits for antenna installation

4.CHANNEL SELECTION

The FCC has allocated 83.5 MHz of spectrum in the 2.4 GHz band where the TRACER 4106 operates, and 125 MHz of spectrum in the 5.8 GHz band where the TRACER 4206 operates. Figure 1 and Figure 2 illustrate the bandwidth division.

		Channel A				Channel B
2400 MHz	2416	2422	2428	2441.75	2456	2462	2468	2483.5 MHz

Bandplan 1 Bandplan 3 Bandplan 2

Bandplan 1 Bandplan 3 Bandplan 2

Figure 1. 2.4 GHz Bandwidth Division (TRACER 4106)

		Channel A				Channel B
	Bandplan 1	Bandplan 2	Bandplan 3		Bandplan 1	Bandplan 2	Bandplan 3
5725 MHz	5734	5744	5753	5787	5814	5824	5833	5850 MHz

Figure 2. 5.8 GHz Bandwidth Division (TRACER 4206)

612804206L2-1A

© 2004 ADTRAN, Inc.

37

Image 37

Contents Tracer 4106/4206 To the Holder of the Manual TrademarksAbout this Manual Revision History Save These Important Safety Instructions Safety InstructionsRadio Frequency Interface Statement FCC-Required InformationExposure to Radio Frequency Fields FCC Output Power RestrictionsPre-Sales Inquiries and Applications Support Repair and ReturnPost-Sale Support Installation and Maintenance SupportTraining Table of Contents Table of Contents Tracer 4106/4206 System Manual System Description Configuration and Management Features and BenefitsSystem Overview OperationalLine-of-Sight Receiver PowerReceiver Sensitivity Antenna Information Other ConsiderationsADTRAN, Inc Terminology LINE-OF-SIGHTDecibels Calculating the Fade MarginReceiver Power Antenna Gain Transmitted Power PTPath Distance d Carrier Wavelength λSystem Losses L Typical Coaxial Loss for Common Cable Types Path Loss LPT1 Ports Receiver SensitivityAntenna Alignment Antenna InformationTracer Rssi Test Points Antenna Beam PatternsFresnel Zones, Earth Curvature, & Antenna Heights Path Availability Other ConsiderationsTerrain Terrain Factor Description Climate Climate Factor Description Values normally used are listed belowReviewing the Front Panel Design At-A-Glance SpecificationsPower Requirements Equipment DimensionsReviewing the Front Panel Design Rssi Monitoring InterfaceReviewing the Tracer 4106/4206 Rear Panel Design RS-232 Connection DB-25 Terminal Use Name Connector DescriptionRear Panel Description RS-232 Connection PinoutRS-232 Connection Modem Use Tracer 4106/4206 DCE to Terminal DTE Diagram DB-25Tracer 4106/4206 DCE to Personal Computer DB-9 T1 Connections RJ-48C T1 Interface Connector PinoutTracer 4106/4206 DCE to Modem DCE DB-25 DC Power Connection Plug-In Terminal Block Alarm Contacts Plug-In Terminal BlockAntenna Interface N-Type connector FuseHardware Description Specification Transmitter AT-A-GLANCE SpecificationsVT100 Terminal Interface Engineering Guidelines Tracer 4106/4206 System Manual Unpack and Inspect the System Network Turnup ProcedureIntroduction Contents of Adtran ShipmentTools Required Unpack and Inspect the SystemChannel Selection Customer ProvidesGrounding Instructions Mounting Options Supplying Power to the UnitInstructions for Rackmounting the Tracer 4106/4206 Inch Rackmount Illustration Connecting the T1 InterfaceMenu Descriptions User Interface GuideTerminal Menu Window Navigating the Terminal MenuPassword Protection Navigating using the Keyboard KeysTerminal Menu and System Control To do this Press this keyElapsed Time Menu DescriptionsContact Information RF StatusRx Power T1 Status Error/Alarm OnlyTx Power Remote Tracer StatusMain Menu Tracer System Options Tracer System Options RF Bandplan Receiver Sensitivity Active Bandwidth Receiver Sensitivity for the Tracer 4106/4206Resets all system error counters for the Tracer 4106/4206 T1 Interface Alarms T1x Status/Configuration/LoopbackT1X STATUS/CONFIGURATION/LOOPBACK T1X Line Build OUT T1 Remote Link Loopback T1X Performance History Overview Installing/Troubleshooting the Tracer HardwareOverview LED Indicators PWR LEDTST LED RF Down LEDRF LOW LED T1 Interface Alarm LEDsSTEP-BY-STEP Troubleshooting RF ErrorsINSTALLING/TROUBLESHOOTING the Tracer Hardware Installing/Configuring T1 Hardware