TRACER 4106/4206 System Manual | Section 5 User Interface Guide |
|
|
>TRACER SYSTEM OPTIONS
Figure 4 shows the TRACER 4106/4206 System Options menu page. System option parameters for both the local and remote TRACER 4106/4206 units are available through this menu page.
Figure 4. TRACER 4106/4206 System Options
Press <O> from any menu in the TRACER 4106/4206 VT100 menu structure to access the TRACER System Options menu page.
>TRACER SYSTEM OPTIONS > RX POWER
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols (#). The more symbols (#) displayed, the stronger the signal. If the link is down in either direction, and remote end data is unavailable, DATA NOT AVAILABLE displays in place of the symbols (#). This parameter is display only.
>TRACER SYSTEM OPTIONS > TX POWER
Allows the transmitter levels (for both the local and remote units) to be adjusted. The current transmitter level is displayed using a series of symbols (#). The more symbols (#) displayed, the stronger the signal. If the link is down in either direction, and remote end data is unavailable, DATA NOT AVAILABLE displays in place of the symbols (#).
Reducing the transmitter power of the remote TRACER 4106/4206 could cause the RF link to drop, requiring a technician to manually increase transmit power through the menu system at the remote site.
>TRACER SYSTEM OPTIONS > SITE NAME
Provides a
© 2004 ADTRAN, Inc. | 47 |