ADTRAN NxT1 HSSI/V.35 user manual Sembly revision, Displays the part number of the module

Page 32

Chapter 3. Operation

NXT1 HSSI

OPTION MODULE

The NxT1 HSSI/V.35 Module system controller automatically detects the presence of the NxT1 HSSI Option Module when it is installed in the system (listed as NXT1 HSSI). To see the menus for the NxT1 HSSI Option Module via the terminal menu, use the arrow keys to scroll to the MODULES menu and press <Enter> to access the module choices. V.35 is available when us- ing the optional adapter cable (ADTRAN P/N 3125I081). Some of the fol- lowing menus do not apply when configured for V.35 mode.

INFO

Read security: 5

 

Provides information about the module part number, serial number and as-

 

sembly revision.

 

PART NUMBER

 

Read security: 5

 

Displays the part number of the module.

 

SERIAL NUMBER

 

Read security: 5

 

Displays the serial number of the module.

 

ASSEMBLY REVISION

 

Read security: 5

 

Displays the assembly revision.

 

FIRMWARE REVISION

 

Read security: 5

 

Displays the current firmware revision of the NxT1 HSSI Option Module.

T1 ENABLE

Write Security: 3; Read Security: 5

 

Configures the NxT1 HSSI Option Module to activate the module’s four

 

built-inT1 interfaces. When configuring the module to use more than four

 

T1s from other installed T1/T3 modules, this field should be set to

 

DISABLED.

The NxT1 HSSI/V.35 Module’s four built-in T1 interfaces are activated collectively as a bundle. Setting the T1 ENABLE menu to ENABLED allows you to map from any/all of the built-in T1 ports to the HSSI interface. Setting the T1 ENABLE menu to DISABLED requires ALL of the T1s mapped to the HSSI interface to be from other installed T1/T3 modules.

32

NxT1 HSSI/V.35 Module User Manual

61200771L1-1

Page 31 Page 33
Image 32
Page 31 Page 33
Contents NxT1 HSSI/V.35 Module Page Save These Important Safety Instructions Affidavit Requirements for Connection to Digital Services Page Page SOC REN FIC Usoc Page Page Limited Product Warranty Customer Service, Product Support Information, and Training Post-Sale Support Table of Contents Appendix a Dedicated Maps Configuration List of Tables List of Tables List of Figures Figure A-1 Dedicated Maps MenuList of Figures Introduction NXT1 HSSI/V.35 Module OverviewFunctional Description FeaturesNXT1 HSSI/V.35 Module Specifications Line or payload loopback Local and Remote Physical Description NxT1 HSSI/V.35 Option ModuleInstallation Before Installing the NXT1 HSSI/V.35 ModuleInstalling the NXT1 HSSI/V.35 Module Wiring Usoc RJ-48CPower UP and Initialization Failed Self-Test Operation AlarmsTerminal Menu Structure OperationOverview Modules Read security Write security 3 Read securityModules/Menu on Nor has a module been manually enabled for this option slot Displays the assembly revision Sembly revisionDisplays the part number of the module Displays the serial number of the moduleAccess this menu item Write security 2 Read security Write security 4 Read security Option ModuleRead Security 5 Write Security Functionality between the DTE and the T1 interfacesLA and LB RX Rate and TX Rate Atlas Features Used with NXT1 HSSI/V.35 Module Options RestoreOperation Appendix a Dedicated Maps Configuration Write security3 Read security5Read security5 CREATE/EDIT Maps Write security3 Read security5Write security3 Read security Security level 3 Read securityNXT1 Hssi MenusT1 Trouble Code Service Appendix A. Dedicated Maps Configuration Index Index Index-48
Top Page Image Contents