ADTRAN NxT1 HSSI/V.35 user manual Write security3 Read security, Security level 3 Read security

Page 43

Appendix A. Dedicated Maps Configuration

TO SLOT

Write security:3; Read security:5

Specifies the slot to use for the second end of a connection. Select this option, and a list of all of the slots and the modules installed in the slots displays. Pick the appropriate slot and press <Enter>.

PORT

Write security:3; Read security:5

Specifies the port to use for the second end of a connection. When you select this option, a list of ports and module types appears. Select the appropriate port and module type, and press <Enter>.

FROM CONFIG

Write security:3; Read security:5

Specifies the configuration for the FROM connection. The selec- tions displayed in this field are based on the type of module selected in the FROM SLT option. For detailed information on sub- menus for a particular module type, please refer to the dedicated maps menu discussion for the appropriate network, option, or resource module.

TO CONFIG

Write security:3; Read security:5

Specifies the configuration for the TO connection. The selections displayed in this field are based on the type of module selected in the TO SLT option. For detailed information on submenus for a par- ticular module type, please refer to the dedicated maps menu dis- cussion for the appropriate network, option, or resource module.

SIG

Write security:3; Read security:5

Specifies whether the NxT1 HSSI/V.35 Module uses active Robbed-Bit Signaling (RBS) on the connection. Selecting ON allows the NxT1 HSSI/V.35 Module to preserve signaling bits between the two endpoints of the connection. Selecting OFF ignores the signaling bits of the connection. This selection is auto- matically set to OFF when RBS does not apply. For example, a T1- to-Nx connection is set to OFF.

ACTIVATE TIME

Write security:3; Read security: 5

Sets the time when the map becomes active if you have selected AUTO in the ACTIVATE MAP field. Enter this time in hh:mm:ss 24-hour format.

ENBL DAY

Security level: 3; Read security: 5

Specifies which days of the week the map is active.

61200771L1-1

NxT1 HSSI/V.35 User Manual

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents NxT1 HSSI/V.35 Module Page Save These Important Safety Instructions Affidavit Requirements for Connection to Digital Services Page Page SOC REN FIC Usoc Page Page Limited Product Warranty Customer Service, Product Support Information, and Training Post-Sale Support Table of Contents Appendix a Dedicated Maps Configuration List of Tables List of Tables Figure A-1 Dedicated Maps Menu List of FiguresList of Figures NXT1 HSSI/V.35 Module Overview IntroductionNXT1 HSSI/V.35 Module Specifications FeaturesFunctional Description Line or payload loopback Local and Remote NxT1 HSSI/V.35 Option Module Physical DescriptionBefore Installing the NXT1 HSSI/V.35 Module InstallationInstalling the NXT1 HSSI/V.35 Module Usoc RJ-48C WiringFailed Self-Test Operation Alarms Power UP and InitializationOverview OperationTerminal Menu Structure Modules Write security 3 Read security Read securityModules/Menu on Nor has a module been manually enabled for this option slot Displays the serial number of the module Displays the assembly revisionSembly revision Displays the part number of the moduleAccess this menu item Write security 2 Read security Option Module Write security 4 Read securityFunctionality between the DTE and the T1 interfaces Read Security 5 Write SecurityLA and LB RX Rate and TX Rate Restore Atlas Features Used with NXT1 HSSI/V.35 Module OptionsOperation Write security3 Read security5 Appendix a Dedicated Maps ConfigurationCREATE/EDIT Maps Write security3 Read security5 Read security5Security level 3 Read security Write security3 Read securityMenus NXT1 HssiT1 Trouble Code Service Appendix A. Dedicated Maps Configuration Index Index Index-48
Top Page Image Contents