ADTRAN NxT1 HSSI/V.35 user manual NXT1 Hssi, Menus

Page 44

Appendix A. Dedicated Maps Configuration

NXT1 HSSI

OPTION MODULE

CONNECTS

Write Security: 3; Read Security: 5

 

Enters the dedicated map connections. Press <Enter> to activate the sub-

 

menus.

The NxT1 HSSI/V35 Module supports connects from the module’s four built-in T1 ports as well as other installed T1/T3 modules. Enabling the built-in ports by setting the T1 ENABLE field to ENABLED (see T1 ENABLE on page 32) allows only four T1s from other T1/T3 modules to be mapped to the HSSI interface in addition to the module’s four built-in ports. When the module’s built- in T1 ports are active, only ports 5-8 will be displayed in the available SLOT/PEP field.

TO/FROM CONFIG

Write Security: 3; Read Security: 5

Specifies the configuration for the To/From connection. The following selection applies to the NxT1 HSSI Option Module when connected to a port on a T1 Module. This is the only valid application for the NxT1 HSSI Option Module.

DS0 SELECTION

Defines DS0s for the T1 port. Use this field to define the DS0s for this connection.

For the NxT1 HSSI Module, any entry in the DS0 selection field that is less than 24 DS0s is disregarded. The NxT1 HSSI Module requires the use of all 24 DS0s on a T1 for proper operation.

DS0S AVAILABLE

Indicates which DS0s of the T1 are assigned. DS0 assignment is based on the following items:

DIGIT 0-9

This DS0 is available. The digit that displays in this field repre- sents the last digit of the DS0 number.

*

This DS0 has been requested for this connection, but the DS0 is not yet activated for this port.

!

This DS0 is used by this port in this connection and is currently activated.

S

This DS0 is used in the switched DIAL PLAN.

44

NxT1 HSSI/V.35 User Manual

61200771L1-1

Page 43 Page 45
Image 44
Page 43 Page 45
Contents NxT1 HSSI/V.35 Module Page Save These Important Safety Instructions Affidavit Requirements for Connection to Digital Services Page Page SOC REN FIC Usoc Page Page Limited Product Warranty Customer Service, Product Support Information, and Training Post-Sale Support Table of Contents Appendix a Dedicated Maps Configuration List of Tables List of Tables List of Figures Figure A-1 Dedicated Maps MenuList of Figures Introduction NXT1 HSSI/V.35 Module OverviewFunctional Description FeaturesNXT1 HSSI/V.35 Module Specifications Line or payload loopback Local and Remote Physical Description NxT1 HSSI/V.35 Option ModuleInstallation Before Installing the NXT1 HSSI/V.35 ModuleInstalling the NXT1 HSSI/V.35 Module Wiring Usoc RJ-48CPower UP and Initialization Failed Self-Test Operation AlarmsTerminal Menu Structure OperationOverview Modules Read security Write security 3 Read securityModules/Menu on Nor has a module been manually enabled for this option slot Displays the assembly revision Sembly revisionDisplays the part number of the module Displays the serial number of the moduleAccess this menu item Write security 2 Read security Write security 4 Read security Option ModuleRead Security 5 Write Security Functionality between the DTE and the T1 interfacesLA and LB RX Rate and TX Rate Atlas Features Used with NXT1 HSSI/V.35 Module Options RestoreOperation Appendix a Dedicated Maps Configuration Write security3 Read security5Read security5 CREATE/EDIT Maps Write security3 Read security5Write security3 Read security Security level 3 Read securityNXT1 Hssi MenusT1 Trouble Code Service Appendix A. Dedicated Maps Configuration Index Index Index-48
Top Page Image Contents