ADTRAN T200 H2TU-R dimensions Lifting Detail Assembly

the bracket pattern. Refer to Figure 4 for pad mount access dimensions.

1.At the installation site remove all packaging material enclosing the cabinet.

2.Remove and set aside the mounting hardware kit. Verify contents per Table 2.

3.The cabinet is bolted to two boards running across the box frame. Remove the screws securing the two boards to the wood box frame.

4.Attach lifting details. Screwed into each side of the cabinet is a group of three bolts and washers. Remove these for reuse.

5.Following the illustration in Figure 5, attach the lifting details to each side of the cabinet using the bolt and washer groups. Ensure the sealing washers are placed between the cabinet and the lifting details. Tighten bolts to 110-130 in-lbs.

WARNING

When lifting the cabinet out of the shipping package and during installation, be sure to exercise caution and observe all safety measures.

6.Using appropriately sized and tested hoisting gear, attach a hoist cable between the two lifting details. Hoist the cabinet from the package and lower the cabinet onto its side.

7.Remove all hardware securing the wood shipping frame to the bottom of the cabinet.

63" with

overall open

doors

45"

total

Security

Access

Cover

Figure 4. Pad Mount Dimensions

Table 2. Pad Mounting Hardware

Pad Mount Hardware Kit. Pt# 2150090-8

Description	Quantity
*Lifting details	2
Pad mounting bracket	2
Pad mounting bracket cover	2
3/8-16 x 1" Bolts	4
3/8 Flat washer	4
3/8 Split washer	4
3/8 Sealing washer	4
Security screws	8

*Fasteners used to attach lifting details are shipped pre-inserted into their designated cabinet locations.

CAUTION

Do not reuse shipping hardware. It is not designed for cabinet mounting.

8.Following the illustration in Figure 6 and using the parts supplied in the pad mounting kit, fasten the two pad mounting brackets to both sides of the bottom of the cabinet. Ensure the sealing washers are placed between the cabinet and the pad mounting brackets. Tighten to

100-110 in-lbs.
One side shown, other
side identical.
lifting detail
	Bolt torque:
	110-130 in-lbs
sealing washer
flat washer	bolt
split washer

Figure 5. Lifting Detail Assembly

61150090L1-5A Section 61150090L1-5A, Issue 1 5