61.Attach the end of the Leg Press Cable (69) to the
M8 Nylon Locknut (115). Note: Do not complete- ly tighten the Locknut; it should be tightened so that only two threads of the Cable show past the Locknut, as shown in the inset draw- ing.
I I_bU
I r 115
I
Seat Assembly | 62 | |
29 | ||
|
62.Attach the Seat (29) with the serial number decal on the bottom to the Right Seat Frame (9) with four M6 x 16mm Screws (85).
Repeat this step with the other Seat (29) and the Left Seat Frame (not shown).
63.Attach a Backrest (28) to the Right Upright (4) with four M6 x 16mm Screws (65).
64.Attach a Backrest (28) to the Backrest Frame (27) with four M6 x 16mm Screws (85).
Slide the Backrest Frame (27) into the Left Upright (5). Engage the Knob (121) into the
Upright and Backrest Frame, and turn it clockwise until it is tight.
63
64
27
121
21
