12. Attach the Front Weight Guides (136) to theRight
Top Frame (7) withtwo M10 x 38mm Screws (82)
and two M10 Washers (116).
Repeat this step with the Rear Weight Guides
(24).
13. Orientthe Butterfly Frame (22) as shown.Attach
the ButterflyFrame to the Right Upright (4) with
two M8 x 72ram Bolts (91), two M8 Washers
(117), and two M8 Nylon Locknuts (115). Do not
tighten the Locknuts yet.
Attach the Butterfly Frame (22) to the Right Top
Frame (7) with two M8 x8Omm Bolts (94), two
M8Washers (117), and two M8 Nylon Locknuts
(115). Do not tighten the Locknuts yet.
14. Attach the Left Seat Frame (10)to the Left Base
(2) withthe two indicated M8 x 75mm Carriage
Bolts (84) and two M8 Nylon Locknuts (115). Do
not tighten the Locknuts yet.
Attach the Left Seat Frame (10) to the Left
Upright(5) with two M8 x 8OmmBolts (94), two
M8 Washers (117), and two M8 Nylon Locknuts
(115). Do not tighten the Locknuts yet.
Attach the Right Seat Frame(9) to the Right
Base (1) and the Right Upright (4) inthe same
manner.
15. Attach the DipArm (20) to the Rear Upright (6)
withtwo M8 x 83mm Bolts (89), two M8 Washers
(117),the Rear Upright Plate (38), and two M8
Nylon Locknuts (115). Make sure the indicated
handle is horizontal.
Tighten the M8 Nylon Locknuts (115) used in
steps 4-15.
12 24"_
13
7\
115
117
117 22
14 117
15
2O
94
115
10
115
2
84
10