56. Wrap the PressCable (69) arounda 90mm
Pulley(39). Attachthe Pulley,two Half Finger
Guards(42), a Small Cable Trap (48), andan
M10 Washer (116)to the Left Upright(5) with an
M10 x 108mm Bolt(99), an M10 Washer(116),
andan M10 Nylon Locknut(114). Make sure the
Cable Trap and Finger Guards ere oriented as
shown.
57. Wrap the Press Cable (69) around a 90mm
Pulley (39).Attach the Pulley, two Half Finger
Guards (42), a SmallCable Trap (48), and an
M1OWasher (116)to the Press Frame (13)with
an M10 x 135mm Bolt (98). Make sure the Cable
Trap and Finger Guards are oriented as
shown.
58. Wrap the Press Cable (69) around a"V"-pulley
(40).Attach the "V"-pulley, two HalfFinger Guards
(42), a Cable Trap (49), andan M10 Washer
(116) to the Left Upright(5) with an M10 x68mm
Bolt(93) andan M10 NylonLocknut (114). Make
sure the Cable Trap and Finger Guards are
oriented as shown.
59. Wrap the PressCable (69) arounda 90mm
Pulley (39). Attach the Pulley,two Half Finger
Guards(42), a Small Cable Trap (48), and an
M10 Washer (116) to the Press Frame(13) with
the M10 x 135mm Bolt (98) usedinstep 57and
an M10 NylonLocknut(114). Make sure the
Cable Trap end Finger Guards are oriented as
shown.
60. Wrap thePress Cable(69) undera 90mm Pulley
(39).Attach the Pulley,two M10 Washers (116),
and two HalfFinger Guards (42)to theLeft Base
(2) with an M10 x52mm Bolt(102) and anM10
Nylon Locknut(114). Make sure the Finger
Guards are oriented as shown.
56
57
69
42
98 116
42 114
39 .e/
30 116421