36.Grease an M8 x 22mm Shoulder Bolt (88). Attach the Ab Cable (72) to the bracket on the Right Upright (4) with the Bolt and an M8 Nylon Locknut (115). Make sure the flat edge of the
Cable is against the bracket on the Upright
37.Locate the Leg Lever Cable (70). Route the Cable through the Leg Lever (11) and the Right
Seat Frame (9). Make sure the Cable is over the rod in the Seat Frame.
Attach a 90mm Pulley (89) inside the Leg Lever (11), over the Leg Lever Cable (70), with an M10 x 65mm Bolt (96), two M10 Washers (116), two 12mm Spacers (75), and an M10 Nylon Locknut (114).
38.Attach a 90ram Pulley (39) inside the Right Seat Frame (9), over the Leg Lever Cable (70), with an M10 x 45mm Bolt (138) and an M10 Nylon Locknut (114).
39.Route the Leg Lever Cable (70) through the Right Upright (4) and under a 90mm Pulley (39). Attach the Pulley and two Half Finger Guards (42) to the
Right Base (1) with an M10 x 48mm Bolt (101) and an M10 Nylon Locknut (114). Make sure the
Finger Guards are oriented as shown.
40.Wrap the Leg Lever Cable (70) over a 90mm Pulley (39). Attach the Pulley and two Half Finger Guards (42) to the Double
Locknut (114). Make sure the Finger Guards are oriented as shown.
36
88
72
115.
37
116
70
75
96
38
114
39/
11442
39
42
LJ o
4O-I_
114_=4
101
39 70
16
