Arm Assembly | t6 |
16.Grease an M10 x 108mm Bolt (99). Orient the Press Frame (13) as shown. Attach the Press Frame to the Left Base (2) with the Bolt and an
M10 Nylon Locknut (114). Do not overtighten the Loeknut; the Press Frame must be able to pivot easily.
17.Remove the M10 x 45mm Button Bolt (105) from a Press Arm (14).
Attach a Press Handle (16) to a Press Arm (14) with an M10 x 65mm Bolt (96), two M10 Washers (116), two M10 x 12mm Spacers (75), and an
M10 Nylon Locknut (114).
Attach a Press Arm Cap (56) to the Press Arm
(14)with an M10 x 45mm Button Bolt (105) and an M10 Large Washer (134).
Attach the Press Arm (14) to the Press Frame
(13)with two M8 x 70ram Bolts (97) and two M8
Nylon Locknuts (115).
Repeat this step with the other Press Arm
(14).
18.Grease an M10 x 108ram Bolt (99). Attach the
Leg Press Frame (12) to the Left Base (2) with the Bolt and an M10 Nylon Locknut (114). Do not overtighten the Locknut; the Leg Press Frame must be able to pivot easily.
Grease an M10 x 77ram Bolt (133). Attach the Foot Plate (23) to the Leg Press Frame (12) with the Bolt and an M10 Nylon Locknut (114). Make sure the decal on the Foot Plate is right side up. Do not overtighten the Locknut; the Foot Plate must be able to pivot easily,
99
J
2
17
116
97
18Grease
13_/
3_o 114
23
114
9 "/
11
