Sears 831.15403 user manual Lock Plate must be able to pivot easily

65. Attach the Lock Plate (80) to the Right Seat	65	\
Frame (9) with an M8 x 69mm Shoulder Bolt (87),

an M8 Washer (117), and an M8 Nylon Locknut

(115). Do not overtighten the Locknut; the	113
Lock Plate must be able to pivot easily.

Attach the Leg Pin (83) to the Right Seat Frame

(9)with an M4 x 16mm Self-tapping Screw (113).

Insert the Leg Pin through the Lock Plate (80) and the Leg Lever (11).

9

66.Press the two Shroud Covers (26) onto the Front Shroud (15), which has a taller opening than the

Rear Shroud (not shown). Attach the Shroud to the Right Top Frame (7) and the Right Base (1) with four M6 x 22mm Bolts (109), four M6 Washers (!32), and four M6 Nylon Locknuts (135). Be careful not to scratch yourself when reaching through the hole in the Shroud.

Repeat this step with the Rear Shroud (not shown),

1 135

22