46. Set an M12 Washer (129) on top of the Short
Weight Tube (123). Thread an M12 Nut (128) all
theway ontothe Leg Lever Cable (70).
Thread the LegLever Cable (70) into the Short
Weight Tube (123). "NghtentheM12 Nut (128)
againstthe M12 Washer (129).
47. Locate the Right Stack Cable (68). Attachthe
Cable to the Left Top Frame (8) with an M8x
80mm Bolt(94), an M8 Washer (117), and an M8
NylonLocknut (115).
48. Wrap the Right Stack Cable (68) under a90mm
Pulley(39). Attach thePulley, a SmallCable Trap
(48), and two HalfFinger Guards(42) tothe
upperhole in the indicated"U'-bracket (50) with
an M10 x52mm Bolt(102) andan M10 Nylon
Locknut(114). Make sure the Cable Trap and
Finger Guards are oriented as shown.
49. Wrap theRight Stack Cable (68) over a"V"-pulley
(40).Attach the "V"-pulley anda CableTrap (49)
to the Left Top Frame (8)with an M10 x 55mm
Bolt (137) and anM1O NylonLocknut(114).
Make sure the Cable Trap is oriented to hold
the Cable in the grooveof the Pulley.
50. Wrap the Right Stack Cable (68) around a 90mm
Pulley (39). Attach the Pulley and aSmall Cable
Trap(48) to the Right Top Frame (7)with an M10
x110mm Bolt(73) andan M10 Nylon Locknut
(114).
46
8
94
50__
39
_48
7102
?--W 114

50 ;-73

])

, 68
18