Specification and accessories | Meridian America 588 manual

Specification and accessories

	Specification		Analogue outputs	1 x pair balanced outputs XLR sockets,
	THD			1=ground, 2=positive phase output,
	THD	Less than -93dBFS.		3=negative phase output.
	Noise	Less than -93dBFS.		1 x stereo analogue direct-coupled
	Noise	Less than -93dBFS.		design featuring 192kHz
				design featuring 192kHz
	Mechanism	Dual-lens pickup with red laser.		24-bit conversion. All audio outputs
	Formats	CD Audio (CD-DA) and MP3.		use FIFO and relocking to give
	Formats	CD Audio (CD-DA) and MP3.		extremely low jitter.
				extremely low jitter.
	Processing	DSP software provides error correction		Two 5 pin 240° DIN sockets.
			Communications	Two 5 pin 240° DIN sockets.
		and on-board decoding for MPEG		Full RS232 control and status for
		Audio.		Full RS232 control and status for
		Audio.		custom integration or automation.
				custom integration or automation.
	Conversion	24-bit Delta Sigma.		Universal supply 100-240V, 50-60Hz,
			Power	Universal supply 100-240V, 50-60Hz,
	Finish	Black textured enamel and glass.		25W.
	Dimensions	88mm x 321mm x 332mm
		(3.46" x 12.64" x 13.07").
	Weight	6.4kg (14lbs).
	Digiital outputs	1 x coax SPDIF/IEC1937.
		1 x optical output, TosLink to EIAJ,
		IEC958 and data compatible.

Introduction

5

Image 10

Meridian America 588 manual Specification and accessories

Contents

Meridian 588 Compact Disc Player Meridian Compact Disc Player User Guide Sales and service in the UK Contents Configuring the compact Disc player Troubleshooting Introduction Meridian 500 Series Professional featuresSeries communications Sample configurations Analogue controller Digital Control Unit Meridian Digital Music System Specification and accessories Specification Available accessories Using the compact disc player Front panel To switch to standby Switching on and offTo switch on from standby To insert a disc To play starting from a particular track Playing a discTo move to the next track To play the disc To stop play Stopping and pausing playTo continue after pausing To pause play Repeating play To cancel A-B repeatTo cancel the repeat function To repeat between two positions To programme by storing the tracks you want to play Programming a selectionTo choose a track to programme To clear a programme To programme by clearing the tracks you do not want to playTo remove a track from a selection To add a track to a selection Scanning a disc Disc information and scanningTo change the display To scan through a disc To display the phase setting Changing the absolute phaseTo change the phase setting Setting up the compact disc player Unpacking Radio interference To avoid interference Safety warningsPositioning the compact disc player To avoid overheating Back panel Connecting the compact disc playerAudio connections Communications connections Comms To connect to other Meridian 500 Series equipment Up the compact disc player Connecting audio To connect to Meridian DSP loudspeakers Configuring the compact disc player Choosing standard settings To restore the standard settings To configure the compact disc player Specifying information about your system Configuring the compact disc player Troubleshooting No lights are displayed when switching on TroubleshootingThere is no sound when playing a disc Display shows No disc when attempting to play a disc Single key press on the remote causes multiple entries Creating MP3 discs To clean the case, display panel, and keypad MaintenanceCleaning To clean the audio connections Service Service and guaranteeGuarantee Index Continuing play Digital output 21 disc information Phase