Troubleshooting
Troubleshooting
30
No lights are displayed when switching on
❍Check that your AC power supply is connected correctly.
❍Check that the ON OFF switch on the back panel is in the ON position.
❍Check that the fuse on the compact disc player back panel and the fuse in the unit’s power plug have not blown; see To change the mains fuse, page 33.
There is no sound when playing a disc
❍Check that your preamplifier is switched on, and the volume is at an appropriate level.
❍Check that the compact disc player is connected correctly to the other components of your system; see Connecting the compact disc player, page 20.
❍Check that the correct source has been selected on your preamplifier.
❍Check that the compact disc player is not paused.
❍Try playing another disc. If this disc works, check the problem disc for signs of dirt or damage.
There is interference on the radio and/ or television when the compact disc player is switched on
Before following the steps below, ensure all units are switched off.
If this equipment does cause or suffer from interference to/from radio or television reception then the following measures should be tried:
❍Reorient the receiving aerial (or antenna) or route the antenna cable of the receiver as far as possible from the 588 Compact Disc Player and its cabling.
❍Ensure that the receiver uses
❍Relocate the receiver with respect to the compact disc player.
❍Connect the receiver and this product to different AC outlets.
