Maintenance, Cleaning | Meridian America 588 specs

Maintenance

Cleaning

When cleaning the compact disc player bear in mind that the front of the compact disc player is plastic, and the display panel and lid are glass.

Disconnect the power cord before cleaning the unit.

Note: Do not use abrasive cleaners on any part of the compact

disc player.

To clean the case, display panel, and keypad

●Use a slightly damp cloth.

Ensure that no water is allowed to get inside the case, and do not reconnect the power until you are certain that the compact disc player is completely dry.

used. Otherwise, it is recommended that you unplug and reconnect the plugs at least once a year. A proprietary contact cleaner can be used to some advantage.

The electrical digital output should be treated in a similar way.

To change the mains fuse

Fuse

Spare

●Remove the mains connector, and pull out the drawer next to the power input to access the fuses.

Before replacing a blown fuse, if possible ascertain the cause of the failure.

To clean the audio connections

The fuse drawer includes a spare fuse. This should be replaced

by a fuse of the same rating.

The audio sockets on the back of the compact disc player are gold-plated and need no cleaning if gold-plated phono plugs are

Troubleshooting

33

Image 38

Meridian America 588 manual Maintenance, Cleaning, To clean the case, display panel, and keypad, To change the mains fuse

Contents

Meridian 588 Compact Disc Player Meridian Compact Disc Player User Guide Sales and service in the UK Contents Configuring the compact Disc player Troubleshooting Introduction Series communications Professional featuresMeridian 500 Series Sample configurations Analogue controller Digital Control Unit Meridian Digital Music System Specification and accessories Specification Available accessories Using the compact disc player Front panel To switch to standby Switching on and offTo switch on from standby To insert a disc To play starting from a particular track Playing a discTo move to the next track To play the disc To stop play Stopping and pausing playTo continue after pausing To pause play Repeating play To cancel A-B repeatTo cancel the repeat function To repeat between two positions To choose a track to programme Programming a selectionTo programme by storing the tracks you want to play To clear a programme To programme by clearing the tracks you do not want to playTo remove a track from a selection To add a track to a selection Scanning a disc Disc information and scanningTo change the display To scan through a disc To change the phase setting Changing the absolute phaseTo display the phase setting Setting up the compact disc player Unpacking Radio interference To avoid interference Safety warningsPositioning the compact disc player To avoid overheating Audio connections Connecting the compact disc playerBack panel Communications connections Comms To connect to other Meridian 500 Series equipment Up the compact disc player Connecting audio To connect to Meridian DSP loudspeakers Configuring the compact disc player Choosing standard settings To restore the standard settings To configure the compact disc player Specifying information about your system Configuring the compact disc player Troubleshooting There is no sound when playing a disc TroubleshootingNo lights are displayed when switching on Display shows No disc when attempting to play a disc Single key press on the remote causes multiple entries Creating MP3 discs To clean the case, display panel, and keypad MaintenanceCleaning To clean the audio connections Guarantee Service and guaranteeService Index Continuing play Digital output 21 disc information Phase