Meridian America 588 Specifying information about your system, S.A, P.A, S.S. Cd, Vol N, Config

Specifying information about your system

You can configure the operation of the 588 Compact Disc Player	The table below shows the options you can configure:
to suit the way your system is set up, and the way in which you
want to use it.	Option	Initial Value
These settings are configured automatically to appropriate	Controller mode (Auto, Con, or NCon).
			Auto
values when you choose the standard type settings, and you
should not normally need to alter them; see Choosing standard	System address (1–8).		S.A. 1
settings, page 26.
	Product address (1–8).
To configure the compact disc player
			P.A. 1
● Switch the 588 to standby.	Start source.
			S.S. CD

Configuring

● Hold down the Display key on the front panel.

Volume displays (Y or N).

The display will initially show the

Vol N

the

software revision number, then:

It will then show the first

Config

compact

configuration option:

Auto

●Press Display to move between the options.

●Press [or ]to change the value of the current option.

disc player

27