Switching on and off
During normal use the compact disc player should be left in the standby state. This uses a negligible amount of electricity, but ensures that the components operate at maximum efficiency from the moment you start playing a disc.
If you are not going to use the compact disc player for a period of several days you should switch the unit completely off, at the back panel, and disconnect it from the AC power supply.
To switch on from standby
●Press Open, *, or >(front panel), or select a source on the remote.
●Switch on any other equipment connected to the compact disc player which is not part of the Meridian 500 Series.
●Press Open (front panel), Function * (remote), or >to close the tray.
To switch to standby
Using the
The display will flash for a few seconds. The compact disc player is then ready for use.
●Press Off.
The display will show:
.
compact
To insert a disc
●Press Open (front panel) or Function * (remote) to open the tray.
●Place your disc, label side up, in the tray as shown opposite.
If you have other Meridian 500 Series equipment connected to the compact disc player, these units will also switch to standby.
If a disc is currently playing, switching to standby will stop the disc, and the disc can safely be left in the unit.
disc player
9
