Programming a selection
You can programme a selection of tracks and then play only the tracks in your selection.
You can only programme a selection using the remote.
You can programme a selection either by storing the tracks you
To programme by storing the tracks you want to play
●Choose the first track you want to play, as described above.
The display will show the track
want to play, or by clearing the tracks you do not want to play. If you programme a selection by storing the tracks you want to hear, you can play the tracks in any order and repeat tracks in the sequence.
number; for example:
●Press Store.
Track 14
The display will change to:
Store 14
You can programme a selection while the disc is playing, in which case the selection will be played after the current track finishes.
Attempting to programme more than
31 tracks will display an error message: Error
To choose a track to programme
●Press [or ]to step through the track numbers until the track you want is displayed, or type the number of the track you want.
You should store the track within two seconds, or it will begin to play.
The track will be labelled Store.
All the other tracks are initially programmed not to play, and will be labelled Clear.
Using the compact disc player
13
