ADTRAN 3060 specifications General, Adtran Total Access 3010 LTU

Section 61182007L1-5A

Issue 1, June 2001

Total Access® 3010 LTU

High-bit-rate Digital Subscriber Line

Transceiver Unit for the Central Office

Installation and Maintenance

CONTENTS
1.	GENERAL	1
2.	INSTALLATION	2
3.	OPERATION	3
4.	HDSL SYSTEM TESTING	4
5.	SCU CONTROL PORT OPERATION (HDSL)	5
6.	HDSL DEPLOYMENT GUIDELINES	17
7.	MAINTENANCE	17
8.	PRODUCT SPECIFICATIONS	17

1182007L1LTU

PWR G703

TST LP1 LP2

ALM

9. WARRANTY AND CUSTOMER SERVICE			................... 17
Appendix A.		HDSL H-LSS Circuit Configuration and Turnup
		for G.703 Fed Systems	A-1
Appendix B.		HDSL H-LSS Circuit Configuration and Turnup
		for DS3-Fed Systems	B-1
FIGURES
Figure 1. ADTRAN Total Access 3010 LTU			1
Figure 2. LTU Edge Connector Wiring			2
Figure 3. LTU Span Powering Diagram			4
Figure 4.	HDSL Loopbacks		5
Figure 5. RS-232 (DB-9) Pin Assignments			5
Figure 6.	Logon Screen		7
Figure 7.	Total Access Screen		7
Figure 8. Access Module Menus Screen			8
Figure 9.	HDSL Main Menu Screen		9

TX

E

Q

RX

TX

M

O

N

RX

ACT

GRN = NORM

YEL = MAN

A P S

Figure 10.	Configuration Screen	9
Figure 11.	Provisioning Screen	10
Figure 12. Network Source Screen		10
Figure 13.	Status Screen	11
Figure 14. REG #1 Status Screen		11
Figure 15.	Alarms Screen	12
Figure 16.	Test Screen	13
Figure 17. Performance History Screen		13
Figure 18.	Protection Configuration Screen – Main	14
Figure 19.	Protection Configuration Screen – Auxiliary	14
Figure 20. Set Circuit ID Screen		16
Figure 21. Alarm Option Screen		17
TABLES
Table 1. Faceplate LED Indicators		3
Table 2.	Screen Abbreviations	6
Table 3.	LP1 and LP2 Guidellines	12
Table 4.	Protection Configuration Option Settings	15
Table 5.	Total Access 3010 LTU Specifications	18
Table B-1.	Faceplate LED Indicator	B-2

1. GENERAL

The ADTRAN Total Access 3010 HDSL Transceiver Unit for the Central Office (LTU), part number 1182007L1, is the Central Office (CO) unit used to deploy an HDSL E1 circuit using 4-wire metallic facilities. See Figure 1.

Figure 1. ADTRAN Total Access 3010 LTU

The E1 input signal is supplied from the network via individual G.703 lines or an E3 multiplexer. The HDSL signals are provided to the local loop. The Total Access 3010 LTU works in conjunction with the ADTRAN NTU and REG to provide an E1 service up to 9.4 km on the local loop.

The LTU works with multiple list versions of the HDSL unit Remote end (NTU) and HDSL Range Extender (REG) as listed below:

•1245043Lx Low Voltage T400 REG

•1245031Lx, Low Voltage T200 NTU

•1245033Lx, Nx64 NTU

•1245044L3, 4th Gen - T400 NTU

•1245035Lx, 5th Gen - T200 NTU

The Total Access 3010 LTU can be deployed in circuits consisting of one LTU and one NTU or in a protection configuration requiring two LTUs and two NTUs. When deployment requires the HDSL Range Extender (REG), this LTU can be deployed with one or two REGs and one NTU.

61182007L1-5A	Trademarks: Any brand names and product names included in this document are	1
	trademarks, registered trademarks, or trade names of their respective holders.