3Com T1/PRI manual Overview, Supported Features, Accessing, User Interface

This chapter contains an overview of supported features and instructions

for accessing the Dual T1/PRI Network Application Card (NAC) through

the user interface (UI) console.

Supported Features

These features are supported in this release:

■ RFC-1406 (Definitions of Managed Objects for the DS1 and E1

Interface Types) Error Counters—UAS, CCS, and SEFS

■ Increased Number of Modem Pools—from 4 to 12

Accessing the

To access the Dual T1/PRI NAC’s UI console, connect the following cables

User Interface

to the corresponding Network Interface Card (NIC) RS-232 port.

This port’s baud rate is defined by DIP switch settings on the Dual T1/PRI

NAC. Refer to the NAC’s Getting Started Guide for more information.