CD (1 or 2) | ALRM (1 or 2) | LPBK (1 or 2) | T1 Condition |
LED Color | LED Color | LED Color | |
|
|
|
|
|
|
|
|
Green | Off | Off | No Alarm |
|
|
|
|
Green | Red | Off | Remote Frame Alarm |
|
|
| (RFA) |
|
|
|
|
Off | Red | Off | Loss of Signal Alarm |
|
|
| (LOS) |
|
|
|
|
Red | Red | Off | Out of Frame Alarm |
|
|
| (OOF) |
|
|
|
|
Red | Red | Off | Unframed All Ones Alarm |
|
|
| (AIS) |
|
|
|
|
Green | Off | Green | Loopback in Progress |
|
|
| |
| Layer 2 |
| |
|
|
|
|
Any | Any | Off | Signaling Channel Up |
|
|
|
|
Any | Any | Amber | Signaling Channel Down |
|
|
|
|
*If Layer 1 alarms exist, Layer 2 status is not indicated.
If LEDs indicate an alarm condition, refer to the alarm event status screen for details.
Alarm LEDs will still register during loopback.
About T1/PRI Alarm Layer 1 alarm conditions are categorized into one of three alarm levels:
Levels
Alarm | Severity | Result |
|
|
|
Red Alarm | High | Loss of connection and/or data locally |
|
|
|
Blue Alarm | High | No data received from Telco; all 1’s received by NAC |
|
|
|
Yellow Alarm | High | Improper data received at remote end |
|
|
|