![](/images/new-backgrounds/1266944/26694443x1.webp)
Configuring | Configure inbound call routing by selecting option 4 from the UI console’s | ||
Inbound Call | main menu. | ||
Routing |
|
|
|
|
| Copyright 3Com Corporation, 1998 | |
|
| Dual T1/PRI Application Card Revision 3.1.4 (Card Id: 27) | |
|
| Boot Code Linked Date : Mon Dec 04 17:41:48 1995 | |
|
| Operation Code Linked Date: Tue Feb 23 16:41:51 1999 |
Main Menu
1Command
2Status
3Card Configuration
4Inbound Call Routing Configuration
5Span Line 1 Configuration
6Span Line 2 Configuration
7SW Fault Manager Event Logging
8Logout
Enter menu selection and press Return.
Menu Selection
Pressing option 4 at the main menu prompt produces this screen:
Inbound Call Routing Configuration
|
| Current |
1 | Default |
|
2 | Allow Analog Modem Calls: | Disabled |
3 | Inbound Phone Number Routing Configuration | |
4 | Inbound Phone Number Routing Configuration Status (Entries | |
5 | Inbound Phone Number Routing Configuration Status | |
6 | Reserved Pool to Inbound Phone Number Assignment | |
7 | Modem/ | |
8 |
9 Allow
Enter menu selection and press Return or press Esc to exit.
Menu Option 1 Selecting a Gateway to process digital calls
Digital calls handled by the T1/PRI are passed along to an
The
If no Gateway is installed, enter N at the prompt.
Menu Option 2 Allowing modem analog calls
Enabling this option allows the chassis to accept incoming analog modem calls and route them appropriately.