![](/images/new-backgrounds/1266944/26694437x1.webp)
Configuring Span Lines 1 and 2
The following types of cause codes are supported:
Cause Code Type | Default Cause Code Value | Description |
|
|
|
A | 58 | All calls blocked |
|
|
|
B | 58 | Analog calls blocked |
|
|
|
C | 58 | Digital calls blocked |
|
|
|
D | 58 | No modems available |
|
|
|
E | 58 | No gateway available |
|
|
|
Use the following syntax when configuring this option:
CCT:CCV
Where:
CCT = Cause code type
CCV = Cause code value
Pressing R at the prompt resets all codes to the default value of 58.
Configuration changes will take place immediately.
Menu Option 13 Configuring the DS0 level call-type blocking
DS0 level
Configure the
■All calls (analog and digital) blocked
■Analog calls blocked
■Digital calls blocked
■No calls blocked
Any changes made will take effect on the next call.
Use the following syntax when configuring this option: BCT:DS0# (to configure a single DS0)