3Com 3C971-F manual Netware 4.1 Server Driver Installation, Overview

Page 46

4 NETWARE 4.1 SERVER DRIVER INSTALLATION

Overview

The 3C971-F ATMLink PCI adapter driver for ﬁle servers running Novell® NetWare™ 4.1 provides standards-based ATM LAN emulation connectivity to an ATM network. This allows you to run legacy LAN applications, Ethernet networking technologies and Ethernet protocols over an ATM network. The procedures in this chapter include all the necessary steps to complete the installation process.

The NetWare driver utilizes switched virtual circuits (SVCs) to establish connections between two end stations on the network. The driver dynamically sets up and tears down connections. For LAN emulation, the driver provides for broadcast/multicast addressing and other LAN-like services. This allows the host protocols to function as if they were talking to a real MAC layer of an Ethernet interface.

The 3C971-F adapter supports multiple Emulated LANs (ELANs). A single 3C971-F adapter can have up to four different MAC addresses and can thus belong to four different ELANs simultaneously.

CAUTION: Your ATM switch must be set to support the UNI 3.0/3.1 standard for switched virtual circuits.

Before installing the driver, review the README document included with the software.

The basic installation procedures for the 3C971-F adapter driver are:

Image 46

Contents PCI 155 Fiber Network Adapter User GuideLifetime Warranty Sweden, Finland, Norway 3C971-F Atmlink PCI 155 Fiber 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Troubleshooting Page Figures Prompt for Additional Channels About this Guide How to Use This GuideIntroduction Conventions Text DescriptionIntroduction 3C971-F ATMLink PCI AdapterProduct Features Software Drivers 3C971-F Adapter Installation KitPCI Technology Introduction Installation Overview Hardware InstallationTools Required Installing the 3C971-F Adapter Save the screw for later in this sectionInstalling the 3C971-F Adapter Press down gently and ﬁrmly on the board to seat it properly 3SC Duplex Connection Turn on the power to the computer Windows NT Driver InstallationOverview Installation Procedures Overview System Requirements Installing the Adapter Device Driver 1Network Settings Screen Select the Add Adapter button. The dialog box in -2 appearsInsert the device driver diskette in a ﬂoppy disk drive 3Selecting the Floppy DriveIf needed, change the drive designation Select the OK buttonEdit the PCI adapter parameters Edit the signaling transport items 6Conﬁguring the Signaling Transport7Completed Network Settings Select the OK button on the Network Settings screen Edit the TCP/IP parametersWindows NT Driver Installation Installing the Adapter Device Driver Select Restart Now to reboot the computer Select OK when the TCP/IP Conﬁguration is completeConﬁguring the LAN Emulation Clients LECs Set the value in the Interrupt list box 10LEC ConﬁgurationSelect the Conﬁgure button Elan Name blankEdit the LEC ATM Adapter items 11LEC ATM Adapter ConﬁgurationWindows NT Driver Installation When all clients are conﬁgured, select the OK button Select the OK button to exit the LEC Conﬁguration dialog boxSelect OK Exit Windows NT and reboot the computer 12LECS/LES Reboot PromptSelect the Control Panel icon from the Main group Removing a Windows NT DriverSelect the Remove button 14Conﬁrming Adapter and Driver Removal Click the OK button in the Network Settings screen Select the Restart Now button to reboot the computerNetware 4.1 Server Driver Installation Loading the Novell NetWare Server Driver Select Driver options Press Insert to install an unlisted driver 3Select Additional DriverInsert the 3Com 3C971-F driver diskette in a ﬂoppy drive 5Notes for Selecting a DrivePress Enter to select the driver Conﬁguring Network ChannelsSelect Yes to copy the driver ﬁles to the server Configuring Network Channels 9Conﬁguring TCP/IP Network Interface Edit Channel number 10Change IPX Frame TypeEnter Elan Name Enter the LECS/LES network addressConfiguring Network Channels Select Save parameters and load driver Press Enter to accept the assigned numberDo one of the following 15Prompt for Additional ChannelsEditing the AUTOEXEC.NCF File 17Selecting the NCF Files EditorFrom the system prompt, enter the command Removing a Driver from NetWareSelect NCF ﬁles options Troubleshooting Startup ProblemsBootup Problems Applications ProblemsAdapter Problems Memory SpecificationsHardware Bus InterfaceNetwork Connections Standards ComplianceEnvironment RangeOn-line Technical Services Access by ModemAccess by Isdn Call the telephone number nearest youLog on to CompuServe Press Return to see the 3ComForum main menuSupport from Your Network Supplier Returning Products for Repair Country Telephone Number Fax NumberGlossary ATM ForumCall control Call setupCell End system Cell switchingConnectionless ATM HeaderIlmi MbpsMultimode Packet switchingMulticast NodeService bit rate SignalingVirtual circuit virtual channel Token ringVirtual path VPI Index NumericsLEC Limited Warranty 3Com Corporation FCC Class a Verification Statement Reader Comment Form 3Com Corporation Business Reply Mail