❐Press SELECT again to return the number of times that FastStor has picked a cartridge from any of the front slots. The display will appear similar to the following:
(000000XX)
2 | 3 | 4 | 5 | 6 | 7 |
❐Press NEXT to access the next event.
The events that FastStor keeps track of are listed below:
Front Pick Cartridge | Front Pick Retries |
Rear Pick Cartridge | Rear Pick Retries |
Drive Pick Cartridge | Drive Pick Retries |
Front Place Cartridge | Front Place Retries |
Rear Place Cartridge | Rear Place Retries |
Drive Place Cartridge | Drive Place Retries |
Drive Door Retries |
|
❐Pressing SELECT when the return value for dRV dR RE is displayed will return FastStor to LdR REAdY. Also, pressing the MODE button at any time will return FastStor to LdR REAdY.
UPGRADE DRIVE FIRMWARE
The following procedure is to be used only when you are upgrading the drive firmware using a Firmware Upgrade (FUP) tape.
❐After entering the dIAG MENU, press the MODE button until the following appears on the LCD:
UPG 
rv fw
1 | 2 | 3 | 4 | 5 | 6 | 7 |
❐Press SELECT to begin the drive firmware upgrade process. The following message will be blinking on the LCD:
Ct 2 (sel)
1 | 2 | 3 | 4 | 5 | 6 | 7 |
46Troubleshooting and Diagnostics