ADIC FastStor Mass Storage Device manual Physical

Page 68

Drive:

Type:

FastStor DLT 4000 — Quantum® model DLT4000

 

FastStor DLT 7000 — Quantum® model DLT7000

 

FastStor DLT 8000 — Quantum® model DLT8000

Data Capacity:

Up to 40 GB per 1800 ft cartridge (DLT4000)

(compressed mode)

Up to 70 GB per 1800 ft cartridge (DLT7000)

 

Up to 80 GB per 1800 ft cartridge (DLT8000)

Data Transfer Rate:

3.0 MB/sec. sustained (180 MB/min., DLT4000)

(compressed mode)

10.0

MB/sec. sustained (600 MB/min., DLT7000)

 

12.0

MB/sec. Sustained (720 MB/min., DLT8000)

Loader:

Media type:

DLT ½-inch, metal-particle cartridges

Capacity:

Up to 560 GB

Cartridge Change:

10 seconds max

Indicators/Controls:

4 button keypad with LCD menu display, Power button, Power LED, Activity LED and Alarm

 

LED to monitor and control system status, diagnostics and configuration

Interface:

FastStor DLT4000 — SE or HVD, Fast SCSI, 68-pin HD

 

FastStor DLT7000 — SE or HVD, Fast/Wide SCSI, 68-pin HD

 

FastStor DLT8000 — LVD/SE or HVD, Fast/Wide SCSI, 68-pin HD

Reliability:

 

Maintenance:

Drive head cleaning with DLT cleaning cartridge when indicated by drive, or automatic with

 

Autoclean enabled.

MSBF:

Greater than 250,000 cartridge changes (net, drive and media) with scheduled maintenance.

MTBF:

More than 80,000 power-on hours

MTTR:

Within 30 minutes

Physical:

 

Dimensions:

9.25" (w) x 23.25" (d) x 7.5" (h)

Weight:

26.5 lb

Shipping Weight:

37 lb

Power Consumption:

 

 

Less than 85 Watts

Environment:

 

Electrical:

100-120/220-240 Vac, 1.2-0.6 Amps, 50-60 Hz

Temperature:

10° C to 40° C (Operating)

Humidity:

5% to 80% RH, non-condensing (Operating)

 

90% maximum (Storage/Shipping)

Vibration:

0.3 g (5-500-5 Hz), Operating

 

Tested per ISTA for storage/shipping

Shock:

3 g Operating

 

Impact tested per ISTA for storage/shipping

52Specifications

Image 68
Contents Installation Operating Guide FastStorCopyright Notice Copyright Adic 1997, 1998Copyright Notice Europe Copyright 1997 Adic EuropeIC Notice Canada Only Regulatory NoticesFCC Notices USA Only Vcci Notices Japan Only EN 55022 Compliance Czech Republic OnlyCE Notice Declaration of Conformity Safety Notices PrecautionsBlank Table of Contents Table of Contents Quick Start Guide LDR Scsi ID 1, DRV Scsi ID Power Button LCD indicates 1-7 loaded Scsi Cable Xvi Quick Start Guide Chapter Equipment Description Features Scsi Interface DLT DrivesOptions Switches and Indicators ConnectorsFastStor Series Front Panel Rea y 3 4 5 6Mode DLT Media DLT Data CartridgeApplication Software Other RequirementsScsi Host Adapter Hardware Installation Unpacking and Inspecting Installing the Host AdapterChecking the Accessories Installing the Scsi Cable and Terminator FastStor Rear PanelPreparing the Host Computer System Installing the Application SoftwareConnecting More than One FastStor Operation and Maintenance General Guidelines Powering on the SystemNormal Operations Setting the Scsi IDs Power Up ChecksInit Rv initOperation and Maintenance Prepare and Install the Data Cartridges Drive Status Messages Close and Lock the Front DoorFastStor Modes ModeSRC slot Mode 1A Load DRVLoa rv Ejecting Mode 1B Eject DRVEject rv SRC slot N Mode 2 Load SlotLoa slot Mode 3 Eject Slot Eject slotSt slot n Mode 4 Eject PckrEject pckr Fmt Mode 5 DensityEnsity Scsi Mode 6 SET Scsi IDSet scsi Cycle pwr Rv scsiRv I Cleaning Tape Normal MaintenanceCleaning the Drive Head Drive Head Cleaning Procedure It means You shouldCleaning the Enclosure Troubleshooting and Diagnostics Installation Problems Loader and Drive Operational ProblemsSp l r fw Iag menuSp fw Fw Nnnn Sp rv fwSp mtn fw Mtn fw NNSp fp fw Fp fw NnnnSp T fw Sign onChg mo e Cycle TestCycle Test CycleSRMV 2 Sel CleaningCt 2 Sel Enabling Autoclean AC oNUsing Autoclean Disabling AutocleanAC OFF SP cOUNTSFrt pk ct 000000XX UPG rv fwRmv 2 sel FastStor Error Messages Error Message ListingWhen You Call ADIC’S Technical Assistance Center Environmental ConsiderationsBlank Appendix Physical