Cisco Systems D200 DLP-D214 Change the Service State for a Port, Click the Provisioning Card tabs

Page 10

Chapter 19 DLPs D200 to D299

DLP- D213 Provision the Card Mode for ML-Series Ethernet Cards

DLP-D213 Provision the Card Mode for ML-Series Ethernet Cards

 

Purpose

This task provisions the card mode for ML-Series Ethernet cards

 

Tools/Equipment

None

 

Prerequisite Procedures

DLP-D60 Log into CTC, page 17-49

 

Required/As Needed

As needed

 

Onsite/Remote

Onsite or remote

 

Security Level

Provisioning or higher

 

 

Step 1

In node view, double-click the ML-Series Ethernet card graphic to open the card.

Step 2

Click the Provisioning > Card tabs.

Step 3

For the ML-Series Ethernet card, select an option from the drop-down Mode menu:

•HDLC—High-level data link control. (Does not support VLAN trunking, which is standard on most Cisco data devices.)

•GFP-F—Frame-mapped generic framing procedure, a PDU-oriented adaptation mode that maps a client frame into one GFP frame.

•RPR 802.17—802.17 Resilient Packet Ring, which is IEEE compliant

Note For more details about the interoperabilty of Optical Networking System (ONS) Ethernet cards, refer to the Ethernet Card Software Feature and Configuration Guide for the Cisco ONS 15454, Cisco ONS 15454 SDH, and Cisco ONS 15327.

Step 4 Click Apply.

Step 5 Return to your originating procedure (NTP).

DLP-D214 Change the Service State for a Port

Purpose

This task puts a port in service or removes a port from service.

Tools/Equipment

None

Prerequisite Procedures

DLP-D60 Log into CTC, page 17-49

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Note To provision E-Series or G-Series Ethernet ports, see the “DLP-D220 Provision E-Series Ethernet Ports” task on page 19-19or the “DLP-D222 Provision G-Series Ethernet Ports” task on page 19-22.

Step 1 In node view on the shelf graphic, double-click the card with the ports you want to put in or out of service. The card view appears.

 

Cisco ONS 15454 SDH Procedure Guide, R7.2

19-10

October 2007

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DLP-D201 Apply a Lock-On 19-1Required/As Needed DLP-D202 Apply a LockoutPurpose 19-2DLP-D203 Clear a Lock-On or Lockout 19-3DLP-D205 Clean Fiber Connectors with Cletop 19-4Click the Provisioning Server Trails tabs DLP-D206 Clean the Fiber AdaptersDLP-D207 Delete a Server Trail 19-5Click the Provisioning External Alarms tabs DLP-D208 Change External Alarms Using the AIC-I CardDLP-D209 Change External Controls Using the AIC-I Card 19-6DLP-D210 Change AIC-I Card Orderwire Settings 19-7Click the Performance Ether Ports Statistics tabs DLP-D211 Provision CE-1000-4 Ethernet PortsClick the Provisioning Ether Ports tabs 19-8Network view, click the Provisioning Overhead Circuits tabs DLP-D212 Create a User Data Channel Circuit19-9 Click the Provisioning Card tabs DLP-D214 Change the Service State for a Port19-10 DLP-D215 Consolidate Links in Network View 19-111shows a network view with unconsolidated DCC and PPC links 19-1219-13 Consolidated Links in Network ViewDLP-D216 Change the STM-N Card ALS Maintenance Settings 19-14Manual Restart for Test -Manually 19-15Click the Provisioning MS-SPRing tabs DLP-D217 MS-SPRing Exercise Ring Test19-16 19-17 19-18 Security DLP-D219 Provision a Low-Order Tunnel RouteDLP-D220 Provision E-Series Ethernet Ports Click the Provisioning Port tabsClick the Provisioning Vlan tabs 19-20Setting Description 19-21Click the Performance Statistics tabs DLP-D222 Provision G-Series Ethernet Ports19-22 DLP-D223 Download an Alarm Severity Profile 19-23Click OK DLP-D224 Adjust the Java Virtual Memory Heap Size19-24 DLP-D225 Enable Alarm Filtering 19-25DLP-D229 View Circuits on a Span DLP-D227 Disable Alarm Filtering19-26 DLP-D230 Change a Circuit State 19-27DLP-D231 Edit a Circuit Name 19-28DLP-D232 Change Active and Standby Span Color 19-29DLP-D233 Edit Sncp Circuit Path Selectors Click Reset to Defaults19-30 19-31 19-32 Selecting Single Roll Attributes19-33 Selecting a New Endpoint19-34 Viewing the Rolls TabClick Finish 19-3519-36 19-37 10 Selecting Dual Roll Attributes11 Setting Roll Routing Preferences 19-3819-39 Click the Circuits tab 19-4019-41 19-42 19-43 Click the Circuits Rolls tabs DLP-D240 Cancel a RollDLP-D239 Delete a Roll 19-44DLP-D241 Clear an MS-SPRing Manual Ring Switch 19-45DLP-D242 Create an MS-SPRing on a Single Node 19-46DLP-D243 Create a Vlan 19-4719-48 12 Reinitialization Tool19-49 19-50 DLP-D246 Provision E-Series Ethernet Card Mode 19-51DLP-D247 Change an STM-N Card Click the Maintenance Protection tabs19-52 DLP-D248 Delete VLANs DLP-D249 Provision IP Settings19-53 Click the Provisioning Network General tabs 19-5419-55 Active TCC2/TCC2P LEDs Standby TCC2/TCC2P LEDs 19-56Type-ChooseSimple Password DLP-D250 Set Up or Change Open Shortest Path First ProtocolClick the No Authentication button 19-5719-58 DLP-D251 Set Up or Change Routing Information Protocol 19-59DLP-D254 TCC2/TCC2P Card Active/Standby Switch Test 19-60DLP-D255 Cross-Connect Card Side Switch Test 19-61DLP-D256 View Ethernet Statistics PM Parameters Click the Maintenance Cross-Connect tabs19-62 Click the Performance Utilization tabs DLP-D257 View Ethernet Utilization PM Parameters19-63 DLP-D258 View Ethernet History PM Parameters 19-64DLP-D260 Set Auto-Refresh Interval for Displayed PM Counts 19-65DLP-D262 Filter the Display of Circuits DLP-D261 Refresh PM Counts for a Different Port19-66 19-67 19-68 J1 Function Cards 19-6919-70 19-71 DLP-D265 Change the Login Legal Disclaimer 19-72DLP-D266 Change IP Settings 19-73DLP-D268 Apply a Custom Network View Background Map 19-74DLP-D271 Change Node Security Policy on a Single Node DLP-D269 Enable Dialog Box Do-Not-Display Option19-75 19-76 DLP-D272 Change Node Security Policy on Multiple Nodes 19-77DLP-D273 Modify Snmp Trap Destination 19-78DLP-D303 Initiate an MS-SPRing Force Ring Switch task on 19-79Change Card 19-80DLP-D295 Perform a Manual Span Upgrade on an Sncp 19-8119-82 19-83 DLP-D298 Check the Network for Alarms and Conditions 19-84DLP-D299 Initiate an MS-SPRing Span Lockout 19-8519-86

D200 specifications

Cisco Systems has long been a leader in networking technology, and one of its standout products is the Cisco D200. Designed to meet the demands of modern businesses, the D200 is a versatile and robust device that facilitates seamless connectivity and effective network management.

The Cisco D200 is primarily known for its performance and reliability in various deployment scenarios. It is equipped with dual-band Wi-Fi capabilities, supporting both 2.4 GHz and 5 GHz frequencies. This allows users to optimize their wireless network, reducing interference and providing the flexibility to support a wide range of devices in an increasingly wireless world.

One of the standout features of the D200 is its advanced security protocols. Featuring integrated firewalls and support for VPNs, the device ensures that data remains protected against potential cyber threats. With the rise in remote work and digital collaboration, the D200 provides businesses with secure access control, ensuring that sensitive information is safeguarded from unauthorized access.

Another key characteristic of the D200 is its ease of management. With Cisco's user-friendly interface, network administrators can easily configure and monitor the device. The D200 is also compatible with Cisco's DNA Center, enabling businesses to leverage automation and AI-driven insights to optimize their networks and improve operational efficiency.

Performance-wise, the D200 boasts impressive throughput capabilities, making it suitable for high-traffic environments such as offices and educational institutions. Its robust hardware allows for multiple concurrent connections, ensuring that even during peak usage times, network performance remains uninterrupted. Quality of Service (QoS) features also prioritize critical applications, enhancing the overall user experience.

In terms of scalability, the D200 is designed to grow with a business. Whether an organization is expanding its device fleet or increasing bandwidth demands, the D200 can adapt to these changes without compromising performance. Moreover, ongoing firmware updates from Cisco ensure that the device remains current with the latest technologies and security enhancements.

In summary, the Cisco D200 is an essential tool for any business seeking to enhance its networking capabilities. With its advanced features, secure architecture, and ease of management, it stands out as a reliable choice for organizations looking to future-proof their networking infrastructure. As technology continues to evolve, the D200 remains a stalwart in enabling connectivity and efficiency in the digital age.
Top Page Image Contents