Cisco Systems D200 DLP-D217 MS-SPRing Exercise Ring Test, Click the Provisioning MS-SPRing tabs

Page 16

Chapter 19 DLPs D200 to D299

DLP- D217 MS-SPRing Exercise Ring Test

DLP-D217 MS-SPRing Exercise Ring Test

Purpose

This task tests the multiplex section-shared protection ring (MS-SPRing)

 

functionality without switching traffic. Ring exercise conditions (including

 

the K-byte pass-through) are reported and cleared within 10 to 15 seconds.

Tools/Equipment

None

Prerequisite Procedures

DLP-D60 Log into CTC, page 17-49

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Step 1 From the View menu, choose Go to Network View.

Step 2 Click the Provisioning > MS-SPRing tabs.

Step 3 Click the row of the MS-SPRing you will exercise, then click Edit.

Step 4 Exercise the west port:

a.Right-click the west port of any MS-SPRing node and choose Set West Protection Operation. Figure 19-4shows an example. (To move a graphic icon, press Ctrl while you drag and drop it to a new location.)

Note For two fiber MS-SPRings, the squares on the node icons represent the MS-SPRing working and protect channels. You can right-click either channel. For four-fiber MS-SPRings, the squares represent ports. Right-click either working or protect ports.

Figure 19-4 Protection Operation on a Three-Node MS-SPRing

b.In the Set West Protection Operation dialog box, choose EXERCISE RING from the drop-down list.

c.Click OK.

d.In the Confirm MS-SPRing Operation dialog box, click Yes.

On the network view graphic, an E appears on the MS-SPRing channel where you invoked the exercise. The E will appear for 10 to 15 seconds, then disappear.

 

Cisco ONS 15454 SDH Procedure Guide, R7.2

19-16

October 2007

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DLP-D201 Apply a Lock-On 19-1DLP-D202 Apply a Lockout PurposeRequired/As Needed 19-2DLP-D203 Clear a Lock-On or Lockout 19-3DLP-D205 Clean Fiber Connectors with Cletop 19-4DLP-D206 Clean the Fiber Adapters DLP-D207 Delete a Server TrailClick the Provisioning Server Trails tabs 19-5DLP-D208 Change External Alarms Using the AIC-I Card DLP-D209 Change External Controls Using the AIC-I CardClick the Provisioning External Alarms tabs 19-6DLP-D210 Change AIC-I Card Orderwire Settings 19-7DLP-D211 Provision CE-1000-4 Ethernet Ports Click the Provisioning Ether Ports tabsClick the Performance Ether Ports Statistics tabs 19-8Network view, click the Provisioning Overhead Circuits tabs DLP-D212 Create a User Data Channel Circuit19-9 Click the Provisioning Card tabs DLP-D214 Change the Service State for a Port19-10 DLP-D215 Consolidate Links in Network View 19-111shows a network view with unconsolidated DCC and PPC links 19-1219-13 Consolidated Links in Network ViewDLP-D216 Change the STM-N Card ALS Maintenance Settings 19-14Manual Restart for Test -Manually 19-15Click the Provisioning MS-SPRing tabs DLP-D217 MS-SPRing Exercise Ring Test19-16 19-17 19-18 DLP-D219 Provision a Low-Order Tunnel Route DLP-D220 Provision E-Series Ethernet PortsSecurity Click the Provisioning Port tabsClick the Provisioning Vlan tabs 19-20Setting Description 19-21Click the Performance Statistics tabs DLP-D222 Provision G-Series Ethernet Ports19-22 DLP-D223 Download an Alarm Severity Profile 19-23Click OK DLP-D224 Adjust the Java Virtual Memory Heap Size19-24 DLP-D225 Enable Alarm Filtering 19-25DLP-D229 View Circuits on a Span DLP-D227 Disable Alarm Filtering19-26 DLP-D230 Change a Circuit State 19-27DLP-D231 Edit a Circuit Name 19-28DLP-D232 Change Active and Standby Span Color 19-29DLP-D233 Edit Sncp Circuit Path Selectors Click Reset to Defaults19-30 19-31 19-32 Selecting Single Roll Attributes19-33 Selecting a New Endpoint19-34 Viewing the Rolls TabClick Finish 19-3519-36 19-37 10 Selecting Dual Roll Attributes11 Setting Roll Routing Preferences 19-3819-39 Click the Circuits tab 19-4019-41 19-42 19-43 DLP-D240 Cancel a Roll DLP-D239 Delete a RollClick the Circuits Rolls tabs 19-44DLP-D241 Clear an MS-SPRing Manual Ring Switch 19-45DLP-D242 Create an MS-SPRing on a Single Node 19-46DLP-D243 Create a Vlan 19-4719-48 12 Reinitialization Tool19-49 19-50 DLP-D246 Provision E-Series Ethernet Card Mode 19-51DLP-D247 Change an STM-N Card Click the Maintenance Protection tabs19-52 DLP-D248 Delete VLANs DLP-D249 Provision IP Settings19-53 Click the Provisioning Network General tabs 19-5419-55 Active TCC2/TCC2P LEDs Standby TCC2/TCC2P LEDs 19-56DLP-D250 Set Up or Change Open Shortest Path First Protocol Click the No Authentication buttonType-ChooseSimple Password 19-5719-58 DLP-D251 Set Up or Change Routing Information Protocol 19-59DLP-D254 TCC2/TCC2P Card Active/Standby Switch Test 19-60DLP-D255 Cross-Connect Card Side Switch Test 19-61DLP-D256 View Ethernet Statistics PM Parameters Click the Maintenance Cross-Connect tabs19-62 Click the Performance Utilization tabs DLP-D257 View Ethernet Utilization PM Parameters19-63 DLP-D258 View Ethernet History PM Parameters 19-64DLP-D260 Set Auto-Refresh Interval for Displayed PM Counts 19-65DLP-D262 Filter the Display of Circuits DLP-D261 Refresh PM Counts for a Different Port19-66 19-67 19-68 J1 Function Cards 19-6919-70 19-71 DLP-D265 Change the Login Legal Disclaimer 19-72DLP-D266 Change IP Settings 19-73DLP-D268 Apply a Custom Network View Background Map 19-74DLP-D271 Change Node Security Policy on a Single Node DLP-D269 Enable Dialog Box Do-Not-Display Option19-75 19-76 DLP-D272 Change Node Security Policy on Multiple Nodes 19-77DLP-D273 Modify Snmp Trap Destination 19-78DLP-D303 Initiate an MS-SPRing Force Ring Switch task on 19-79Change Card 19-80DLP-D295 Perform a Manual Span Upgrade on an Sncp 19-8119-82 19-83 DLP-D298 Check the Network for Alarms and Conditions 19-84DLP-D299 Initiate an MS-SPRing Span Lockout 19-8519-86

D200 specifications

Cisco Systems has long been a leader in networking technology, and one of its standout products is the Cisco D200. Designed to meet the demands of modern businesses, the D200 is a versatile and robust device that facilitates seamless connectivity and effective network management.

The Cisco D200 is primarily known for its performance and reliability in various deployment scenarios. It is equipped with dual-band Wi-Fi capabilities, supporting both 2.4 GHz and 5 GHz frequencies. This allows users to optimize their wireless network, reducing interference and providing the flexibility to support a wide range of devices in an increasingly wireless world.

One of the standout features of the D200 is its advanced security protocols. Featuring integrated firewalls and support for VPNs, the device ensures that data remains protected against potential cyber threats. With the rise in remote work and digital collaboration, the D200 provides businesses with secure access control, ensuring that sensitive information is safeguarded from unauthorized access.

Another key characteristic of the D200 is its ease of management. With Cisco's user-friendly interface, network administrators can easily configure and monitor the device. The D200 is also compatible with Cisco's DNA Center, enabling businesses to leverage automation and AI-driven insights to optimize their networks and improve operational efficiency.

Performance-wise, the D200 boasts impressive throughput capabilities, making it suitable for high-traffic environments such as offices and educational institutions. Its robust hardware allows for multiple concurrent connections, ensuring that even during peak usage times, network performance remains uninterrupted. Quality of Service (QoS) features also prioritize critical applications, enhancing the overall user experience.

In terms of scalability, the D200 is designed to grow with a business. Whether an organization is expanding its device fleet or increasing bandwidth demands, the D200 can adapt to these changes without compromising performance. Moreover, ongoing firmware updates from Cisco ensure that the device remains current with the latest technologies and security enhancements.

In summary, the Cisco D200 is an essential tool for any business seeking to enhance its networking capabilities. With its advanced features, secure architecture, and ease of management, it stands out as a reliable choice for organizations looking to future-proof their networking infrastructure. As technology continues to evolve, the D200 remains a stalwart in enabling connectivity and efficiency in the digital age.
Top Page Image Contents