Black Box ASTC3000, ASTCRCR, ASTCPOEK From Advanced options  Clock Config/Transaction file to

Chapter 5: Utility

Figure 5-20. Auto-Sync Utility Get Configuration File.

NOTE: Operation status will appear below. Press the clear button to clear status.

From Advanced options  Clock Config/Transaction file to;

Get selected clock configuration: copy the configuration file from the selected clock to a binary file with the name “ATVSConfig.bin”. This file will be located in a folder called Configuration at the following path Program Files/Auto-Sync Utility/Configuration. If multiple clocks are selected, the first clock downloaded will be the one copied to this file. If another clock is copied to that file at a later date then the configuration will be updated with that information. See the status window in Figure 5-20 for an example of configuration file download.

Get Transactions: copy the transaction file from the selected clock to a text file with the name of the clock [for example “3c-0d-e8_Trans.txt”].” This file will be located in a folder called Configuration at the following path Program Files/Auto-Sync Utility/Transaction. If multiple clocks are selected, all the selected clocks downloaded will be the one copied to this folder. If a report is created from these files using the utility, any transaction file in the folder will be included in the report (see Figure 5-21). See the status window in Figure 5-21 for an example of configuration file download.

Clear Transactions: clear all sync transactions stored in the clock.

Reset Config: Reset the clock configuration to factory default settings. This command could be used to reset the configuration if the Username/password was lost.

Factory Reset: Clear all transactions and reset clock configuration to factory default.

724-746-5500 blackbox.com 5-15