Black Box ASTC3000POE, ASTCRCR, ASTCPOEK, ASTCBK, ASTCRCB Wall Mounting, Printing First Printout

Auto-Sync Time Clock

NOTE: Plugging the AC power cord into a wall socket will cause the printer carriage to move up. When AC power is not connected properly or the PoE is not functioning, the colon will not flash (see Error Messages in Chapter 6).

2.8.Wall Mounting

The following procedure is recommended for wall mounting:

1.With the cover removed, the wall mount plate can be removed by using your index finger as shown to pry open the bottom portion (see arrow 1). Slide the wall mount plate down in the direction of arrow 2. Use caution not to disrupt the power and Ethernet cables on the back when removing the wall mount plate.

2.Knock out the three holes in the mounting plate.

3.Mount the plate on the wall using three #10 screws or equivalent.

4.Align the Auto-Sync Time Clock with the hooks on the mounting plate. Press down and toward the wall until a "CLICK" is heard. Replace the cover, lock it and remove the key. Your Auto-Sync Time Clock is now wall mounted.

NOTE: Be sure to wall mount your Auto-Sync Time Clock within 6ft of an 110V power source and an Ethernet connection (AC power is not required if equipped with PoE option).

2.9.Printing

2.9.1.The First Printout

Please verify the following before attempting to print:

1.Is all the packaging material removed from inside the clock?

2.Is the FPR battery connected? (optional)

3.Is the cover securely on the clock?

2-12724-746-5500 blackbox.com