Black Box ASTC3000POE, ASTCRCR, ASTCPOEK, ASTCBK, ASTCRCB, ASTCRCG, ASTCKEY manual Clock Reset

Auto-Sync Time Clock

Status Area

Information

Figure 6-5. Clock Reset.

NOTE: If any of the clock reset commands fail, you will see a red “Failed” in the status area. All of the reset commands will appear in the transaction report highlighted in orange. See the following for an example of reset commands when using View Transactions from the Reports Utility :

01/06/2009 08:46:26 : - USER - All transaction(s) have been deleted

01/06/2009 08:47:13 : - USER - Clock

print counter has been reset to : 1

2.Select Yes for, “Do you want to clear transactions?” and clear the clock transactions by pressing the Clear Transactions button. The status will be displayed after the operation. If everything is Ok, you will see “Successful” in the Status field. This only clears the clock transactions from the flash memory, i.e., sync information.

3.Select Yes for, “Do you want to do a complete clock reset?” to clear the clock transactions and reset the clock configuration to factory default settings by

pressing the button. The status will be displayed after the operation. If everything is Ok, you will see “Successful” in the Status field. This clears the clock transactions and all user configurations from the flash memory, i.e., sync information, schedules, users, etc.

NOTE: This operation will reboot the clock, which means that you will automatically be logged off the clock and the Login screen will appear. The clock name will be reset to the default name (see Figure 3-4), and the clock will temporarily disappear from the list of Bonjour devices and then reappear with the default name. However, it is recommended to use the “Reset” button to clear an error message (see Figure 6-9).

6-4 724-746-5500 blackbox.com