Normal Startup Sequence | Black Box ASTCKEY, ASTCRCR, ASTCPOEK

Chapter 2: Installation

15.Insert and tighten the two (2) top plate side retaining screws (one on each side).

16.Replace the upper cover of the Auto-Sync Time Clock (see Figure 2-2).

17.Connect the clock Ethernet cable to a network connection (AC power no longer required when equipped with the PoE option).

NOTE: After installing the PoE with FPR and connecting the unit to a network connection for the first time, the PoE may require up to 24 hours to fully charge the battery pack, but the unit can be immediately used. You must keep the clock plugged into the network during normal operation to maintain a continuous charge. The power reserve battery is designed to provide additional power for printing during normal operation.

NOTE: For units with the PoE/FPR option, disconnect the FPR battery pack cable connector if the Auto-Sync Time Clock will not be plugged into a PoE terminal for an extended amount of time. Leaving the battery pack connected without charging for a long time could promote battery harm and damage to the clock.

NOTE: For units with the PoE/FPR option, leaving the Auto-Sync Time Clock unplugged from a PoE terminal or without power for more than 24 hours may create a problem with the clock starting up (you will see “low bat” briefly appear in the display). In this instance, the clock should be started with the battery pack cable disconnected and the clock plugged into a PoE terminal. Wait until the clock starts up, or displays the time, then the battery pack cable can be reconnected and it will charge. During this time, it is recommended to wait for 24 hours before printing.

2.7.Normal Startup Sequence

During power up, the clock will flash “boot”, then sequentially display the IP address twice, and complete the startup sequence with a display of the time (Hours:Minutes:Seconds) with a flashing colon. IMPORTANT - if the clock cannot make a network connection it will flash 0.0.0.0 for the IP Address. If this happens please verify that the clock is connected to the network!

Normally, within a minute or two after the clock has been connected to a network and plugged in, the clock will connect to a time server and perform a Startup Time Sync. The correct time will appear in the display after a successful time sync. If the clock CANNOT perform a successful STARTUP SYNC, six day indicators (cursors) will flash, while the day indicator associated with the current day of the week will not flash.

Figure 2-15. Startup Display Sequence.

724-746-5500 blackbox.com

2-11

ASTC3000, ASTCBK, ASTCKEY, ASTCRCG, ASTCPOEK specifications

The Black Box ASTC series of products, including ASTCRCB, ASTCRCR, ASTC3000POE, ASTCPOEK, and ASTCRCG, represent a compelling suite of solutions designed for advanced technology applications in various environments. These devices are engineered for critical communication, reliable data transmission, and effective networking in both commercial and industrial contexts.

The Black Box ASTCRCB is a robust solution designed for control room applications. One of its standout features is its ability to manage multiple video and data sources seamlessly, allowing operators to switch between different inputs effortlessly. This device is characterized by its user-friendly interface, which simplifies the monitoring process and enhances collaboration among teams. Another key characteristic is its high resolution and video quality, providing clear visuals essential for decision-making in high-stakes environments.

The ASTCRCR, on the other hand, is tailored for seamless audio and video signal distribution. Its robust infrastructure supports HD video formats and multiple connectivity options, including HDMI and DisplayPort outputs. A hallmark of the ASTCRCR is its support for 4K video resolution, ensuring that users can deliver stunning visuals to various displays without compromising quality. With advanced signal processing capabilities, it minimizes latency and preserves signal integrity.

In contrast, the ASTC3000POE is focused on Power over Ethernet (PoE) functionality, allowing for the transmission of data and power over a single cable. This product is designed for easy installation and scalability, which is particularly beneficial in large network setups. The ASTC3000POE supports a variety of devices, including IP cameras and VoIP phones, making it an ideal choice for expanding IT infrastructures.

The ASTCPOEK builds on the PoE capabilities, adding enhanced energy efficiency and management features. Its energy-saving technologies not only reduce operational costs but also contribute to a more sustainable environment. This model is particularly valuable in minimizing setup complexity and maximizing cable management, making it a favorite among network engineers.

Finally, the ASTCRCG offers an all-in-one solution for collaborative groups, featuring integrated communication tools that facilitate team interaction. This device is characterized by its real-time data sharing capabilities and compatibility with various conferencing systems, making it ideal for educational and corporate settings.

Each model within the Black Box ASTC series embodies advanced technologies that emphasize reliability, efficiency, and user-centric design, ensuring they meet the evolving needs of today's digital landscapes.