Samsung SP-L220, SP-L200, SP-L250 Resolution/Size Modes table, Connecting a PC using a D-Sub cable

Page 19

Resolution/Size Modes table.

5.Click the [OK] button to close the window, and click the [OK] button of the <Display Properties> window to close the window.

The computer may restart automatically.

6.Shut down the PC and connect to the projector.

Process might vary depending on your type of computer or Windows versions. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.)

This unit appliance supports up to 24 bits per pixel in Color quality when it is used as a PC monitor.

Projected images may differ from the monitor depending on monitor manufacturer or Windows versions.

When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If not, there may be signal problems.

Basic Settings Connecting the Power Connecting an External Device

1. Rear of Projector

Plug the power cord into the power terminal on the rear side of the projector.

Basic Settings Connecting the Power Connecting an External Device

Connecting a PC using a D-Sub cable

Image 19
Contents Page Do not plug multiple devices into a single wall outlet Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Under no circumstances touch the power plug with wet handsKeep the power cord away from heaters Unplug the power plug before cleaning the productOperable Do not disassemble, or attempt to fix or modify the product Place the product on the ground carefullyDo not drop the product while carrying it Keep the product out of children’s reachThere is a danger of fire or explosion Correct disposal of batteries in this product Europe only Make sure to place your remote control on a table or deskPage Front/Upper Side An optical engine adopting new LCD technologyUnpacking Lens coverLED Indications Clearing Indicator ProblemsRemote Control Signal Receiver Menu PowerMove VOL MuteReturn ExitIBM AV Timing VIDEO/S-VIDEO AV Timing D-Sub Format Resolution ScanZoom and Focus Adjustment Installing the ProjectorSelect Menu Setup Install Rear-Floor Select Menu Setup Install Front-FloorScreen Size and Projection Distance Leveling with Adjustable FeetScreen Connecting a PC using a D-Sub cable Resolution/Size Modes tableConnecting an External Monitor Connecting an AV device with component output Connecting an AV device using a D-Sub cableConnecting an External Speaker Connecting using a Video/S-Video cablePage Turning off the projector Turning on the projectorSelecting an input source Presentation Mode StandardMovie Mode DVD Combo Satellite STB 11 PC AV ReceiverColor Temperature Offset Gain Timing signalAuto Adjustment Coarse Fine Reset Logo Blue Black ResetUsage Color PC menu Sharpness,Tint Zoom Sound Language Menu OptionTransparency Low Medium High OpaqueOff 10 min 20 min 30 min Menu and Remote Control Installation and ConnectionScreen and External Source Defaultfrom the menu Lamp Replacement To clean the exterior and lens of the projectorClean the projector using a soft, dry cloth To clean the interior of the projectorReplacing and Cleaning the Filter Lamp Replacement ProcedurePrecautions when replacing the projector filter Location of the ventilation openings Ventilating openingsCIS Asia Pacific