Samsung SP-L200 Turning on the projector, Turning off the projector, Selecting an input source

Page 24

Basic Functions Input Picture Setup Option

Turning on the projector

Check that the lens cover is opened completely.

Turn the power on.

Check that the STAND BY LED indicator is turned on.

Press the Power button. While the power is turned on (with the Power button on the remote control or at the top of the projector), the blue LAMP LED indicator blinks.

When the power is turned on completely, the LAMP LED indicator remains blue.

If the projector is turned on when the lamp is not sufficiently cooled, a temporary loud noise may be heard because the fan speed increases to cool the lamp.

Turning off the projector

Press the Power button. (With the remote control or on top of the projector) OK or Cancel is displayed. Select OK using the arrow keys (With the remote control or on top of the projector).

Press the Enter button or press the Power button again.

The STAND BY LED indicator is turned off and the LAMP LED indicator blinks. The fan speed increases to cool the lamp quickly. When the operation is finished,

the LAMP LED indicator is turned off and the STAND BY LED indicator is turned on and remains blue. Remove the power cord.

Close the lens cover.

Selecting an input source

Press the SOURCE button (on the remote control or at the top of the projector).

AV and S-Video modes can only be selected when an external device is connected. PC1 and PC2 modes can be selected regardless of an external device being connected.

Basic Functions Input Picture Setup Option

* Click the Play()/Stop() button in the table below to view the video file.

Image 24

Contents Page Insert the power plug firmly so that it does not come loose Do not use loose power outlets or damaged power cablesUnder no circumstances touch the power plug with wet hands Do not plug multiple devices into a single wall outletUnplug the power plug before cleaning the product Keep the power cord away from heatersOperable Place the product on the ground carefully Do not drop the product while carrying itKeep the product out of children’s reach Do not disassemble, or attempt to fix or modify the productThere is a danger of fire or explosion Make sure to place your remote control on a table or desk Correct disposal of batteries in this product Europe onlyPage An optical engine adopting new LCD technology Front/Upper SideLens cover UnpackingClearing Indicator Problems LED IndicationsRemote Control Signal Receiver Power MenuMove Mute ReturnExit VOLIBM AV Timing D-Sub Format Resolution Scan AV Timing VIDEO/S-VIDEOInstalling the Projector Select Menu Setup Install Rear-FloorSelect Menu Setup Install Front-Floor Zoom and Focus AdjustmentLeveling with Adjustable Feet Screen Size and Projection DistanceScreen Resolution/Size Modes table Connecting a PC using a D-Sub cableConnecting an External Monitor Connecting an AV device using a D-Sub cable Connecting an AV device with component outputConnecting using a Video/S-Video cable Connecting an External SpeakerPage Turning on the projector Turning off the projectorSelecting an input source Mode Standard Movie ModeDVD Combo Satellite STB 11 PC AV Receiver PresentationTiming signal Color Temperature Offset GainAuto Adjustment Coarse Fine Reset Reset Logo Blue BlackUsage Color PC menu Sharpness,Tint Zoom Language Menu Option TransparencyLow Medium High Opaque SoundOff 10 min 20 min 30 min Installation and Connection Menu and Remote ControlScreen and External Source Defaultfrom the menu To clean the exterior and lens of the projector Clean the projector using a soft, dry clothTo clean the interior of the projector Lamp ReplacementLamp Replacement Procedure Replacing and Cleaning the FilterPrecautions when replacing the projector filter Ventilating openings Location of the ventilation openingsCIS Asia Pacific