Samsung SP-L250, SP-L200, SP-L220 manual Timing signal, Color Temperature Offset Gain

Page 26

Timing signal.

2)Contrast : Used to adjust the contrast between the object and the background.

3)Brightness : Used to adjust brightness of the entire picture.

4)Sharpness : Used to adjust the sharpness of the picture.

When the input signal is PC Timing, the Sharpness cannot be adjusted.

5)Color : Used to adjust color lighter or darker.

When the input signal is PC Timing, the Color cannot be adjusted.

6)Tint : Used to obtain more natural color of objects using Green or Red enhancement.

When the input signal is PC Timing and PAL and SECAM of the

[S-Video] and [AV] modes, the color cannot be adjusted.

7)Color Temperature : You can select the color temperature according to your preferences.

-Factory defaults: 5500K, 6500K, 8000K, 9300K

-You can select the color temperature for the items below according to your preferences.

R-Gain, G-Gain, B-Gain : Adjusts the color temperature of the White level.

R-Offset, G-Offset, B-Offset : Adjusts the color temperature of the Black level.

1)

Color Temperature

5) R-Offset

2)

R-Gain

6)

G-Offset

3)

G-Gain

7)

B-Offset

4)B-Gain

8)Gamma : Changes the brightness characteristic for each color tone of an image.

-The larger (+) the value, the greater the contrast of the bright and dark parts; the smaller (-) the value, the darker the dark parts.

-Adjustable range: -3 to +3

Contrast

Brightness

Sharpness

Color

Tint

Color

Temperature

R-Gain

G-Gain

B-Gain

R-Offset

G-Offset

B-Offset

Gamma

9)Save :You can save the status of a screen you adjusted according to your preferences using the Mode > User OSD.

Save

10) Reset : Restores the mode settings to the factory defaults.

Reset

Size

You can select a screen size according to the type of scene.

 

When the input signal is PC Timing, Zoom1/Zoom2 is not supported.

 

1) Normal

 

2) Zoom1

 

3) Zoom2

 

4) 16:9

Position

Adjust the screen position if it is not aligned.

Digital NR

When a dotted line is displayed or the screen shakes, you can view a better visual quality

 

picture by enabling Noise Reduction.

 

When the input signal is PC Timing, Digital NR does not operate.

Black Level You can select the signal black level according to the input signal. If it is unsuitable for the input signal, the dark parts may not be shown clearly or may be dim.

The Black level can only be set for the 480i and 576i RGB signals of [AV], [S-Video] and AV Timing(D-Sub)modes.

-For [AV],[S-Video] and the 480i and 576i signals of AV Timing(D-Sub).

1)0 IRE : Sets the black level to 0 IRE

2)7.5 IRE : Sets the black level to 7.5 IRE

Overscan Using this function, you can cut the edge of the picture when unnecessary information, images appear on the edge of the picture.

This is not supported in [AV] and [S-Video] modes.

This is supported only when the input signal is AV Timing(D-Sub) .

If Overscan is turned off, unnecessary extra parts at the edges of an image may

Image 26
Contents Page Under no circumstances touch the power plug with wet hands Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Do not plug multiple devices into a single wall outletOperable Unplug the power plug before cleaning the productKeep the power cord away from heaters Keep the product out of children’s reach Place the product on the ground carefullyDo not drop the product while carrying it Do not disassemble, or attempt to fix or modify the productThere is a danger of fire or explosion Make sure to place your remote control on a table or desk Correct disposal of batteries in this product Europe onlyPage An optical engine adopting new LCD technology Front/Upper SideLens cover UnpackingClearing Indicator Problems LED IndicationsRemote Control Signal Receiver Move PowerMenu Exit MuteReturn VOLIBM AV Timing D-Sub Format Resolution Scan AV Timing VIDEO/S-VIDEOSelect Menu Setup Install Front-Floor Installing the ProjectorSelect Menu Setup Install Rear-Floor Zoom and Focus AdjustmentLeveling with Adjustable Feet Screen Size and Projection DistanceScreen Resolution/Size Modes table Connecting a PC using a D-Sub cableConnecting an External Monitor Connecting an AV device using a D-Sub cable Connecting an AV device with component outputConnecting using a Video/S-Video cable Connecting an External SpeakerPage Selecting an input source Turning on the projectorTurning off the projector DVD Combo Satellite STB 11 PC AV Receiver Mode StandardMovie Mode PresentationTiming signal Color Temperature Offset GainAuto Adjustment Coarse Fine Reset Usage Color PC menu Sharpness,Tint Zoom ResetLogo Blue Black Low Medium High Opaque Language Menu OptionTransparency SoundOff 10 min 20 min 30 min Screen and External Source Installation and ConnectionMenu and Remote Control Defaultfrom the menu To clean the interior of the projector To clean the exterior and lens of the projectorClean the projector using a soft, dry cloth Lamp ReplacementPrecautions when replacing the projector filter Lamp Replacement ProcedureReplacing and Cleaning the Filter Ventilating openings Location of the ventilation openingsCIS Asia Pacific