Samsung SP-L250, SP-L200, SP-L220 manual Connecting an External Monitor

Page 20

Check that your PC and projector are turned off.

Connect the [PC IN (1 or 2) PC] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. - For the supported input signals, refer to "PC Timing".

Connect the [PC IN (1 or 2) AUDIO] terminal at the back of the projector to the Audio out terminal of your PC using an audio cable (Not supplied).

Connecting an External Monitor

You can view an image on both your projector and a separate monitor at the same time.

Check that your PC and projector are turned off.

Connect the [PC IN (1) PC] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable.

-When connecting a monitor using the [PC OUT] function, make sure to connect your PC to the [PC IN (1) PC] terminal.

-The monitor output which is connected to the [PC OUT] terminal will be normal even if you see a blank screen on your projector.

-The [PC OUT] function also operates in standby mode.

Image 20

Contents Page Insert the power plug firmly so that it does not come loose Do not use loose power outlets or damaged power cablesUnder no circumstances touch the power plug with wet hands Do not plug multiple devices into a single wall outletOperable Unplug the power plug before cleaning the productKeep the power cord away from heaters Place the product on the ground carefully Do not drop the product while carrying itKeep the product out of children’s reach Do not disassemble, or attempt to fix or modify the productThere is a danger of fire or explosion Make sure to place your remote control on a table or desk Correct disposal of batteries in this product Europe onlyPage An optical engine adopting new LCD technology Front/Upper SideLens cover UnpackingClearing Indicator Problems LED IndicationsRemote Control Signal Receiver Move PowerMenu Mute ReturnExit VOLIBM AV Timing D-Sub Format Resolution Scan AV Timing VIDEO/S-VIDEOInstalling the Projector Select Menu Setup Install Rear-FloorSelect Menu Setup Install Front-Floor Zoom and Focus AdjustmentLeveling with Adjustable Feet Screen Size and Projection DistanceScreen Resolution/Size Modes table Connecting a PC using a D-Sub cableConnecting an External Monitor Connecting an AV device using a D-Sub cable Connecting an AV device with component outputConnecting using a Video/S-Video cable Connecting an External SpeakerPage Selecting an input source Turning on the projectorTurning off the projector Mode Standard Movie ModeDVD Combo Satellite STB 11 PC AV Receiver PresentationTiming signal Color Temperature Offset GainAuto Adjustment Coarse Fine Reset Usage Color PC menu Sharpness,Tint Zoom ResetLogo Blue Black Language Menu Option TransparencyLow Medium High Opaque SoundOff 10 min 20 min 30 min Screen and External Source Installation and ConnectionMenu and Remote Control Defaultfrom the menu To clean the exterior and lens of the projector Clean the projector using a soft, dry clothTo clean the interior of the projector Lamp ReplacementPrecautions when replacing the projector filter Lamp Replacement ProcedureReplacing and Cleaning the Filter Ventilating openings Location of the ventilation openingsCIS Asia Pacific