Samsung SRP-500 manual Control commands list, Commands

Chapter 5

Control commands list

5-1. Commands

5.1.1 Commands list for SRP-500 Series. (EPSON TM-U200 Mode)

n	Command	Description		Hexadecimal
1	CR	Print and carriage return	0D
2	HT	Horizontal tab	09
3	LF	Print and linefeed	0A
4	DLE EOT	Transmit real-time status	10 04
5	DLE ENQ	Real-time request to printer	10 05
6	ESC SP	Set right-side character spacing	1B	20
7	ESC %	Select/Cancel user defined characters	1B	25
8	ESC &	Define user-defined characters	1B	26
9	ESC *	Select bit-image mode	1B	2A
10	ESC !	Select print mode	1B	21
11	ESC -	Turn underline mode on/off	1B	2D
12	ESC =	Select peripheral device status	1B	3D
13	ESC 2	Select default line spacing 1/6 lpi	1B	32
14	ESC 3	Set line spacing	1B	33
15	ESC <	Return home	1B	3C
16	ESC ?	Cancel user defined characters	1B	3F
17	ESC @	Initialize printer	1B	40
18	ESC D	Set horizontal positions	1B	44
19	ESC E	Turn emphasized mode on/off	1B	45
20	ESC G	Turn double-strike mode on/off	1B	47
21	ESC J	Print and feed paper <n> vertical units	1B	4A
22	ESC R	Select an international character set	1B	52
23	ESC U	Turn unidirectional printing mode on/off	1B	55
24	ESC a	Select justification	1B	61
25	ESC c 3	Select paper sensor to output paper end	1B	63	33
		signal
26	ESC c 4	Select paper sensor to stop printing	1B	63	34
27	ESC c 5	Enable/disable panel button	1B	63	35
28	ESC d	Print and feed <n> line	1B	64
29	ESC g <0>	Start macro record (For logo)	1B	67	00
30	ESC g <n>	Execute macro (For logo)	1B	67	<n>
31	ESC m	Execute partial cut	1B	6D
32	ESC p	Generate pulse	1B	70
33	ESC r	Select color	1B	72
34	ESC t	Select character code table	1B	74
35	ESC v	Transmit paper sensor status	1B	76
36	ESC {	Turn upside-down printing mode on/off	1B	7B
37	GS ( A	Execute test print	1B	28	41
38	GS I	Transmit printer ID	1D 49
39	GS V	Select cut mode and cut paper	1D 56
40	GS a	Enable/disable Automatic Status Back	1D 61
		(ASB)
41	GS j	Enable/disable Automatic Status Back	1D 6A
		(ASB) for ink
42	GS r	Transmit status	1D 72

33

5.1.2 Commands list for SRP-500 Series. (STAR SP-320 Mode)

n	Command	Description	Hexadecimal
1	BEL	Deferred drive command “A” for peripheral unit 1	07
2	FF	Page feed (Form feed)	0C
3	CR	Print and linefeed (same as LF)	0D
4	SO	Select expanded character mode	0E
5	SI	Select upside-down	0F
6	DC2	Cancel upside-down character	12
7	DC4	Cancel expanded character mode(Default setting)	14
8	CAN	Cancel print data in buffer	18
9	EM	Immediate drive command for peripheral unit2	19
10	SUB	Immediate drive command for peripheral unit 2	1A
11	ESC BEL	Adjust drive pulse width for peripheral unit (Default	1B	07
		setting)
12	ESC -	Set or Cancel underline mode	1B	2D
13	ESC 4	Red color print selection	1B	34
14	ESC 5	Red color print deselection	1B	35
15	ESC @	Initialize printer	1B	40
16	ESC C	Set page length at n lines	1B	43
17	ESC E	Emphasized print mode	1B	45
18	ESC F	Emphasized print mode deselection (Default setting)	1B	46
19	ESC M	Select 9 x 7(Half dots) character size	1B	4D
20	ESC R	Select international character set	1B	52
21	ESC U	Set or cancel uni-direction mode	1B	55
22	ESC W 1	Select expanded character mode	1B	57 31
	ESC W <1>		1B	57 01
23	ESC W 0	Cancel expanded character mode (Default setting)	1B	57 30
	ESC W <0>		1B	57 00
24	ESC _ 1	Select over-line mode	1B	5F 31
	ESC _ <1>		1B	5F 01
25	ESC _ 0	Cancel over-line mode	1B	5F 30
	ESC _ <0>		1B	5F 01
26	ESC a	Feed paper n lines	1B	61
27	ESC d 0	Partial cut	1B	64 30
28	ESC d 1	Partial cut	1B	64 31
29	ESC e 1	Set the control panel switch invalid	1B	65 31
	ESC e <1>		1B	65 01
30	ESC e 0	Set the control panel switch valid	1B	65 30
	ESC e <0>		1B	65 00
31	ESC f 1	Set the ON LINE switch invalid	1B	66 31
	ESC f <1>		1B	66 01
32	ESC f 0	Set the ON LINE switch valid	1B	66 30
	ESC f <0>		1B	66 00
33	FS	Immediate drive command “B” for peripheral unit 1	1C

34