Samsung SRP-500 manual ESC R n, ESC a n, ESC U n

ESC R n

[Name]	Select an international character set
[Format]	ASCII		ESC	R	n
	Hex		1B	52	n
	Decimal		27	82	n
[Range]	0 ≤ n ≤ 10
[Description]	Selects an international character set n from the following
	table:
		n			Character set
		0	U.S.A
		1	France
		2	Germany
		3	U.K.
		4	Denmark I
		5	Sweden
		6	Italy
		7	Spain I
		8	---
		9	Norway
		10	Denmark II
[Default]	n = 0

ESC a n

[Name]	Select justification
[Format]	ASCII	ESC	a	n
	Hex	1B	61	n
	Decimal	27	97	n
[Range]	0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description]	Aligns all the data in one line to the specified position.

n selects the type of justification as follows:

nJustification

0, 48 Left justification 1, 49 Centering

2, 50 Right justification

[Notes]

•The command is enabled only when input at the beginning of the line.

•A portion of data skipped by means of HT is also target data for the justification function.

[Default]	n = 0
[Example]

ESC U n

[Name]	Turn unidirectional printing mode on/off
[Format]	ASCII	ESC	U	n
	Hex	1B	55	n
	Decimal	27	85	n
[Range]	0 ≤ n ≤ 255
[Description]	Turns unidirectional printing mode on or off

•When the LSB of n is 1, turn on unidirectional printing mode.

[Notes]

•Only the lowest bit of n is enabled.

•To avoid horizontal printing misalignment, unidirectional printing mode should be used.

[Default] n = 0

Left justification

ABC

ABCD

ABCDE

Centering

ABC

ABCD

ABCDE

Right justification

ABCC

ABCDC

ABCDEC

51

52