Samsung SRP-500 manual Character Code Tables, Command descriptions, Name Horizontal tab Format

5.1.3 Commands list for SRP-500 Series. (CITIZEN iDP-3541 Mode)

n	Command	Description	Hexadecimal
1	BEL	First drawer drive command1	07
2	LF	Paper feed command	0A
3	FF n	“n”-lines paper feed command	0C n
4	SO	Enlarged character command	0E
5	SI	Normal character command	0F
6	DC1	Initial set command	11
7	DC2	Inverted character command	12
8	DC3	Red color print command	13
9	CAN	Clear command	18
10	SUB	Second drawer drive command	1A
11	ESC BEL	Drive pulse setting command for the first drawer	1B	07
12	ESC -	Underline command	1B	2D
13	ESC 1	1/9 inch paper feed preset command	1B	31
14	ESC 2	2/9 inch paper feed preset command	1B	32
15	ESC C	Paper length set command	1B	43
16	ESC P <0>	Paper partial cut command	1B	50	00
17	ESC P <1>	Paper partial cut command	1B	50	01
18	FS	First drawer quick drive command	1C
19	CR	Printing	ØD
20	ESC * n1 n2	Specifying the bit image mode	1B	2A n1 n2
21	ESC f <1>	Form feed	1B	66	Ø1

5-2. Character Code Tables

n	Page
0	PC437
2	PC850
3	PC860
4	PC863
5	PC865
16	PC1252
17	PC866
18	PC852
19	PC858
21	PC862
22	PC864
23	PC874

35

5-3. Command descriptions

HT

[Name]	Horizontal tab
[Format]	ASCII	HT
	Hex	09
	Decimal	10
[Description]	Moves the print position to the next horizontal tab position.
[Notes]

•This command is ignored unless the next horizontal tab position has been set.

•Horizontal tab positions are set with ESC D.

•The default tab positions are at intervals of 8 characters (columns 9, 17, 25..) for the font B (12 x 12).

[Reference] ESC D

LF

[Name]	Print and line feed
[Format]	ASCII	LF
	Hex	0A
	Decimal	10
[Description]	Prints the data in the print buffer and feeds one line
	based on the current line spacing.
[Note]	This command sets the print position to the beginning of
	the line.
[Reference]	ESC 2, ESC 3

CR

[Name]	Print and carriage return
[Format]	ASCII	CR
	Hex	0D
	Decimal	13
[Description]	This command prints the data in the print buffer and does
	not feed the paper.
[Note]	Sets the print starting position to the beginning of the line
[Reference]	LF
		36