Samsung SRP-500 manual ESC ! n, ESC % n, Name Select print modes Format

ESC ! n

[Name]	Select print mode(s)
[Format]	ASCII	ESC	!	n
	Hex	1B	21	n
	Decimal	27	33	n

[Range]			0 ≤ n ≤ 255
[Description]			Selects print mode(s) using n as follows:
Bit	Off/On	Hex		Decimal	Function
0	Off	00		0	Character font A (12 x 14) selected.
	On	01		1	Character font B (12 x 12) selected.
1	-	-		-	Undefined.
2	-	-		-	Undefined.
3	Off	00		0	Emphasized mode not selected.
	On	08		8	Emphasized mode selected.
4	Off	00		0	Double-height mode not selected.
	On	10		16	Double-height mode selected.
5	Off	00		0	Double-width mode not selected.
	On	20		32	Double-width mode selected.
6	-	-		-	Undefined.
7	Off	00		0	Underline mode not selected.
	On	80		128	Underline mode selected.

[Notes]

•When both double-height and double-width modes are selected, quadruple size characters are printed.

•Underlining is added to the entire width of each character, including the space to the right of a character, but is not added to portions of lines that were skipped by means of an HT.

[Default]	n = 1
[Reference]	ESC E, ESC –

41

ESC % n

[Name]	Select/cancel user-defined character set
[Format]	ASCII	ESC	%	n
	Hex	1B	25	n
	Decimal	27	37	n
[Range]	0 ≤ n ≤ 255
[Description]	Selects or cancels the user-defined character set.

When the Least Significant Bit (LSB) is 0, the user- defined character set is canceled and the internal character set is enabled.

When the LSB is 1, the user-defined character set is selected.

[Notes]

•When the downloaded character set has been released, the internal character set is specified automatically.

[Default]	n = 0
[Reference]	ESC &, ESC ?

42