Samsung 731N manual Attaching a Base

Page 14

Monitor and Bottom

Attaching a Base

This monitor accepts a 100 mm x 100 mm VESA-compliant Mounting interface pad .

A.Monitor

B.Mounting interface pad (Sold separately)

1.Turn off your monitor and unplug its power cord.

2.Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

3.Remove four screws and then remove the stand from the LCD monitor.

4.Align the Mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.

Installing the Monitor Driver (Automatic)

When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have.

Image 14

Contents SyncMaster 731N Notational Do not use a damaged or loose plug Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Use only a properly grounded plug and receptacleDo not place the product on the floor Do not drop the monitor when moving itKeep any heating devices away from the power cable Keep the plastic packaging bag out of children’s reach Set down the monitor carefullyDo not place the monitor face down Do not spray water or detergent directly on the monitorOthers Do not remove cover or backDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openingsFalling product could cause physical damage even death Good Postures When Using the Monitor Try to maintain a good posture when using the monitorNatural Color software Cable Sub Cable Power CordMonitor Driver Custom For using a locking device, contact where you purchase it Monitor Assembly Attaching a Base Installing the Monitor Driver Manual Click WindowsMicrosoft Windows XP Operating System Page How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating SystemNatural Color Software Program How to install the Natural Color softwareLinux Operating System Page Auto Menu Description MenuDescription Picture Menu Description Play/Stop Brightness ContrastDescriptionPlay/Stop Coarse Fine Sharpness Position Color Tone Color ControlGamma Position display Language Position Transparency Display TimeImage Reset Color Reset Information Solutions SymptomCan you see Check Signal Cable on the screen? Check ListControl Panel → Display → Settings There is no image on the screenQuestion AnswerUseful Tips Power Supply ResolutionInput Signal, Terminated Signal CableVesa Mounting Interface Dimensions WxDxH/ Weight Simple StandState Normal Operation Power saving mode Power Switch off Environmental considerationsHorizontal Preset Timing ModesPixel Clock Sync Polarity Display Mode Frequency MHz KHz Horizontal FrequencyEurope North AmericaLatin America Asia Pacific Middle East & AfricaVertical Frequency ResolutionDot Pitch Horizontal FrequencyMéxico Power Off, Screen Saver, or Power Save Mode WarrantyWhat is Image retention ? Suggestions for specific applications