Samsung 731N manual Symptom, Check List, Can you see Check Signal Cable on the screen?, Solutions

Page 29

Check List

Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.

Symptom

No images on the screen. I cannot turn on the monitor.

Check List

Is the power cord connected properly?

Can you see "Check Signal Cable" on the screen?

If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen.

Can you see "Not Optimum

Mode","Recommanded Mode 1280 x 1024 60 Hz" on the screen?

Solutions

Check the power cord connection and supply.

Check the signal cable connection.

If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card.

(Refer to the Preset Timing Modes)

Note: If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.

You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.

Adjust the maximum resolution and frequency that the monitor can handle properly.

If the display exceeds SXGA or 75 Hz, a "Not Optimum

Mode","Recommanded Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85Hz, the display will work properly but the "Not Optimum

Mode","Recommanded Mode 1280 x 1024 60 Hz" message appears for one minute and then disappears.

Image 29

Contents SyncMaster 731N Notational Do not disconnect the power cord while using the monitor Insert the power plug firmly so that it does not come looseDo not use a damaged or loose plug Use only a properly grounded plug and receptacleDo not place the product on the floor Do not drop the monitor when moving itKeep any heating devices away from the power cable Do not place the monitor face down Set down the monitor carefullyKeep the plastic packaging bag out of children’s reach Do not spray water or detergent directly on the monitorDo not remove cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetFalling product could cause physical damage even death Try to maintain a good posture when using the monitor Good Postures When Using the MonitorNatural Color software Cable Sub Cable Power CordMonitor Driver Custom For using a locking device, contact where you purchase it Monitor Assembly Attaching a Base Click Windows Installing the Monitor Driver ManualMicrosoft Windows XP Operating System Page Microsoft Windows NT Operating System How to install Click Start , Setting , Control PanelNatural Color Software Program How to install the Natural Color softwareLinux Operating System Page Auto Menu Description MenuDescription Picture Menu Description Play/Stop Brightness ContrastDescriptionPlay/Stop Coarse Fine Sharpness Position Color Tone Color ControlGamma Language Position Transparency Display Time Position displayImage Reset Color Reset Information Can you see Check Signal Cable on the screen? SymptomSolutions Check ListThere is no image on the screen Control Panel → Display → SettingsAnswer QuestionUseful Tips Input Signal, Terminated ResolutionPower Supply Signal CableState Normal Operation Power saving mode Power Switch off Dimensions WxDxH/ Weight Simple StandVesa Mounting Interface Environmental considerationsPixel Clock Sync Polarity Display Mode Frequency MHz KHz Preset Timing ModesHorizontal Horizontal FrequencyEurope North AmericaLatin America Middle East & Africa Asia PacificDot Pitch ResolutionVertical Frequency Horizontal FrequencyMéxico What is Image retention ? WarrantyPower Off, Screen Saver, or Power Save Mode Suggestions for specific applications