Samsung 225MD manual Clean, Others, Do not spray water or detergent directly onto the monitor

Page 6

Clean

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric.

Do not spray water or detergent directly onto the monitor.

zThis may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.

zA dirty connector may cause electric shock or fire.

Make sure to unplug the power cord before cleaning the product.

zOtherwise, this may cause electric shock or fire.

Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth.

zDo not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.

Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year.

zKeep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire.

Others

Do not remove the cover (or back).

zThis may cause electric shock or fire.

zRefer to a qualified servicing company.

Image 6
Contents SyncMaster 225MD Power NotationalDo not use a damaged or loose plug Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Use only a properly grounded plug and receptacleKeep any heating devices away from the power cable InstallationDo not drop the monitor when moving it Do not place the product on the floorPut down the monitor carefully Do not place the monitor face downKeep the plastic packaging bag out of childrens reach Do not spray water or detergent directly onto the monitor CleanOthers Do not remove the cover or backDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openings Good Postures When Using the Monitor Page Features UnpackingManual Quick Setup Guide Without StandCable Sub Cable Stereo Cable TV/DTV Remote Control Sensor Power button Power indicator SpeakerFront PIPPIP Available in PC/DVI Mode Remote Control SensorPower button Turns the monitor On/Off Power indicator DVI/PC in / HDMI/PC/DVI-D Audio PowerRear HDMI/PC/DVI-D AudioANT Extrgb / ServiceService Hdmi in / Digital Audio OutopticalFor using a locking device, contact where you purchase it Common InterfaceVideo / Video / R Audio L Remote Control Source TTX/MIXColor Button PC / DVI Mode M/B MagicBright DualConnecting to a Computer Connecting to a MacintoshConnecting to Other devices Connecting AV DevicesWhen using an outdoor antenna Connecting TVWhen using an interior antenna terminal To connect the RF cable to the antenna input terminalConnecting DVD/DTV Set Top Box Connecting HdmiIs weak signal causing poor reception? Connecting Using a DVI to Hdmi Cable Connecting and Using an AmplifierConnecting Common Interface Connecting HeadphoneFolding the base Attaching a baseInstalling the monitor driver Automatic Installing the monitor driver Manual Microsoft Windows Vista Operating SystemPage Microsoft Windows XP Operating System Page Page How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating SystemLinux Operating System OSD Description Play / StopHdmi PIPAdjusts the Brightness Direct button on the remote control is M/B button EntertainAdjusts the Contrast Adjusts the SharpnessAvailable in PC / DVI Mode Only Contrast Available in PC Mode Only CoarseAdjusts the screen location horizontally and vertically TV / DTV / Ext. / AV / S-Video / Component / Hdmi ModeComponent / Hdmi mode Wide / 169 / Zoom1 / Zoom2 Colour Tone BrightnessZoom1 / Zoom2 169 Zoom1 Zoom2 Off Low Medium High AutoMusic SRS DTV CISFine Tune SortName LNAAvailable in Hdmi Mode Only Normal Low Reset Transparency 1 High Medium Low OpaqueChannel SetupGuide LanguageUpdating the Channel List Manually Editing Your Favourite ChannelsSpace for entering the number is a blank Displaying Programme Information Selecting Channel ListPage Guide Using the Scheduled List Setting the Default GuideViewing All Channels and Favourite Channels Page Setting up the Parental Lock SetupSetting the Subtitle Mode Selecting the Time Zone Spain only Viewing Common Interface Selecting the CI Common Interface MenuResetting Selecting the Preferred Language Audio, Subtitle or Teletext PreferenceSelf-Test Feature Check Self-Test Feature CheckNot Optimum Mode Check List Maintenance and CleaningSymptoms and Recommended Actions Display Adapter DriverMode Shows noise signals Problems related to InstallationMode Function normally TV signal is not receivedRemote control buttons do not respond Problems related to AudioProblems related to Remote Control Screen is blank and is blinkingPage Signal Cable GeneralPowerSaver Preset Timing ModesSupported modes for each external input signal Preset Timing ModesVideo Contact Samsung Worldwide Latin AmericaCIS Terms DVD CatvVHF/UHF BtscDVI For Better DisplayEiaj Hdmi High Definition Multimedia InterfaceAuthority Trademark & Label Licence noticePower Off, Screen Saver, or Power Save Mode WarrantyWhat is Image retention ? Suggestions for specific applications