Samsung SF-515 manual Entering numbers, Editing numbers or name, Inserting pause

Page 26

Entering numbers

You can enter the number of the remote fax machine manually by using the number keypad. The number you pressed appears on the display.

TEL:95551212_

When the display asks you to enter a number, you can also use a one- touch dial button (including group dial) or a 2-digit speed dial number.

Editing numbers or name

If you make a mistake while entering a number or name, move the cursor under the wrong digit by using ➛ or ❿. Then press the correct number to change, or press Search/Delete to delete the number.

Inserting pause

With some private telephone systems, you must dial an access code (9, for example) and listen for a second dial tone before dialling an outside number. In such cases, you must insert a pause in the number. Insert a pause in a number when you are setting up a one-touch or a speed dial number, or when you dial a number without lifting the handset.

To insert a pause, press Redial/Pause while entering the number.

When you dial a number, the dialling process pauses for a specified time at the point where you pressed Redial/Pause.

If you require a longer pause time, press Redial/Pause twice.

2.5 Getting started

Image 26

Contents User’s Guide Trademark Notices Contents Other functions Receiving a faxMaking a copy Automatic diallingTroubleshooting MaintenanceImportant safety information Precautions Safety notes SymbologyInstallation Unpacking TAM lead * UK OnlyControl locations and functions Front viewRear view Document tray Setting up your machineChoosing a location Paper exit trayDocument exit tray Telephone lineAC power cord Extension phone optionalInstalling the toner cartridge Installation Loading paper Insert the paper with the print side facing you Paper type and size Getting started Using the control panel One-touch dialSetup Using the number keypad Entering alphanumeric charactersKeypad Character Assignments Inserting pause Entering numbersEditing numbers or name Setting up your fax number and name Press Start/Enter when the name on the display is correctEnter the correct time and date using the number keypad Setting the time and datePress or ❿ until ‘TIME/DATE SETUP’ appears, then press Speaker volume Adjusting volumeRinger volume Alarm volume/Key volumeBasic operation Sending a fax Preparing documents for faxing or copyingContrast Setting document resolution and contrastResolution Loading document Confirming transmission Cancelling transmissionSending a fax automatically Automatic redialReceiving a fax Receiving modesDistinctive ring pattern detection Drpd Receiving automatically in FAX modeReceiving Manually in TEL Mode Receiving in Auto mode Receiving automatically in ANS/FAX modeReceiving manually using an extension telephone Copying overview Making a simple copyPress Copy or Start/Enter to begin the copy operation Advanced copy featuresPress or ❿ to choose YES or no To search through redial memory RedialTo redial the number last called Press and hold Redial/Pause for 2 secondsSending a recall Monitoring a dual job statusOne-touch dialling Storing a number for one-touch diallingIf you do not want to assign a name, skip this step Sending a fax using a one-touch numberEditing a number for one-touch dialling Press and hold Speed for 2 seconds Speed diallingStoring a number for speed dialling Enter the number you want to store, then press Start/EnterSending a fax using a speed number Editing a number for speed diallingSearching with a particular first letter Searching for a number in the memorySearching sequentially through the memory Memo